mads
|
| posted on 28/11/09 at 06:14 PM |
|
|
rear uprights for discs
can someone please confirm if when you are looking at the rear uprights (for discs), the holes are offset slightly anticlockwise or clockwise? just
trying to fit them and they are such a tight squeeze, dont want to get wrongs on wrong side.
cheers.
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
|
|
bob tatt
|
| posted on 28/11/09 at 07:04 PM |
|
|
the caliper goes to the rear so the caliper mounting lugs on the hub nead to be to the rear of the car. hope this helps
rob
|
|
|
mads
|
| posted on 28/11/09 at 10:32 PM |
|
|
rob, thank you VERY much  all sorted.
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
