flanders
|
| posted on 13/2/17 at 08:35 PM |
|
|
Mk bottom wishbones the same on both sides?
I've stripped my wishbones from the car to have them powder coated.
Are the bottom ones sided O/S N/S or are they identical.
When i place them on top of each other they look identical with regards to geometry
The top ones are quite obviously different and sided.
Also, do I use Austin maxi bottom ball joints? I may as well replace them too
[Edited on 13/2/17 by flanders]
|
|
|
|
|
Kev99
|
| posted on 13/2/17 at 09:27 PM |
|
|
If it the Indy yes they are both the same
I do not know about the Indy R but someone will be along to soon to at yes or no on that
Kev....
|
|
|
flanders
|
| posted on 13/2/17 at 10:19 PM |
|
|
Yeah sorry is an original Indy, that's good then, it's just some of the parts sites list them as being sided...but I couldn't see a
difference
|
|
|
nick205
|
| posted on 14/2/17 at 09:05 AM |
|
|
Having built an original MK Indy some years ago I can verify that the front lower wishbones are NOT handed.
|
|
|
flanders
|
| posted on 14/2/17 at 01:16 PM |
|
|
thanks guys, much appreciated
|
|
|
