locoboy
|
| posted on 20/4/05 at 08:49 AM |
|
|
Rollbar
Can anyone possibly run a tape measure over their standard indy rollbar for me?
The info im after is:
Width at footplates from centre of tube to centre of opposite tube
Height in middle, from top of rear bulkhead to TOP of the tube.
Many thanks
ATB
Locoboy
|
|
|
|
|
Guinness
|
| posted on 20/4/05 at 11:28 AM |
|
|
Mine is 37" or 970mm from centre to centre and 16" or 410mm high from the underside of the mounting plates to the top of the tube. All
measurements pretty accurate.
Hope that helps. Let me know if you need any other dims taking.
Cheers Mike
|
|
|
locoboy
|
| posted on 20/4/05 at 01:02 PM |
|
|
Guinness,
Thanks for the info, is yours one that has the tapering (non vertical) sides? if you know what i mean!
ATB
Locoboy
|
|
|
