zxrlocost
|
| posted on 4/12/05 at 01:53 PM |
|
|
R1 indy Help !!!!
Hi
was just about to fit the cradle ontop of my engine theres 4 mounts on the top two at front which are closer
and the two at the back which are further apart
I can get the further apart ones on fine
but then the two at the front are just basically in the middly of nowhere#
is there something Im not doing right???
ta chris
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
|
|
kurt
|
| posted on 4/12/05 at 04:50 PM |
|
|
Are you sure you've got the right cradle from MK, mine went on really easily? There should be 4 bolts into the engine block from the cradle and
1 long bolt at the back of the engine which runs through a mount on the main chassis. The only problem I had was getting the right bolts, they are
M10 but a very fine thread pitch. M10 bolts come in about 4 different pitches so it's one of the two fine ones.
|
|
|
OX
|
| posted on 4/12/05 at 05:19 PM |
|
|
i struggled to get my bolts in with mine and shed did with his 
chris ,when you ring me it doesnt show up your phone number so i couldnt ring you back .
|
|
|
zxrlocost
|
| posted on 4/12/05 at 05:56 PM |
|
|
X directory mate
put picture in my archive engine cradle
look at the mount on the left its miles away
ta chris
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
zxrlocost
|
| posted on 4/12/05 at 06:27 PM |
|
|
done thanks OX
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
