darrenga
|
| posted on 26/4/06 at 03:35 PM |
|
|
flange rivets
in the build list is says 5mm x 16mm flange rivets,i have to to a couple of places that have said they are 4.8mm not 5mm is this right or do they have
to be 5mm
|
|
|
|
|
Hellfire
|
| posted on 26/4/06 at 03:55 PM |
|
|
For the difference use either...
|
|
|
stevec
|
| posted on 26/4/06 at 03:56 PM |
|
|
You should get a box of them in the deluxe kit,
I did.
Steve.
|
|
|
darrenga
|
| posted on 26/4/06 at 04:03 PM |
|
|
only getting starter kit dont think you get them with that
|
|
|
greggors84
|
| posted on 26/4/06 at 05:31 PM |
|
|
I really wouldnt worry, 0.2 mm is nothing. When you start building the car you will find you worry about little things like this less and less.
Chris
The Magnificent 7!
|
|
|
indykid
|
| posted on 26/4/06 at 06:29 PM |
|
|
just make sure you use a 5mm bit. it'd be a pita to have to ream them all out a gnat's bollock hair if the 5mm rivets wont fit in a 4.8
hole!
sorry if that was obvious
tom
|
|
|
