mackei23b
|
| posted on 23/10/06 at 02:18 PM |
|
|
MK Indy Shocks
Hi there
I'd be gratefull if you could let me know what the open and closed lenghts are for the shox for the font and rear. From what I can gather they
look like 13inch open and 10 inch closed, can you confirm this for me?
I'd also be interested what spring lengths and spring rates you have used. I have a ZX9R engine in the chassis and intent to do some sprints and
hill climbs with it as a reference point.
Many thanks
Ian
[Edited on 23/10/06 by mackei23b]
[Edited on 23/10/06 by mackei23b]
|
|
|
|
|
ReMan
|
| posted on 23/10/06 at 03:51 PM |
|
|
The front springs I ws supplied by MK were 350lb. I think this is what they supply regardles of what engine you are fitting.
On good advice, for my Fireblade engined MK, I changed mine for 275lb which I got from MAC1, though there are plenty of suppliers.
I've only got these sitting on their softest setting at the moment and they seem fine.
13/10" looks about right, again mine are 12" at rest.
HTH
Col
|
|
|
.jpg){kind=avatar}
