Jay k
|
 posted on 23/2/07 at 12:14 PM |
|
|
Mk shock Diameter
I am looking to purchase some Protech shocks, MK say they sell the 1.9" diameter ones (£350).
Is there any reason why the 2.25" diameter shocks cannot be used?
What are the best ones to use for a BEC (fireblade)?
|
|
|
|
|
grahamgg
|
| posted on 23/2/07 at 12:29 PM |
|
|
Your not from JAMIROQUAI are you!!!!!!!!!!!!!!!!!
|
|
|
Jay k
|
| posted on 23/2/07 at 12:38 PM |
|
|
If I was I wouldn't be fused what diameter shocks went on, I buy both sets and see what fitted and which were the best!!!!!!!!!
|
|
|
grahamgg
|
| posted on 23/2/07 at 12:49 PM |
|
|
I have 2.25 on mine and it had a fireblade fitted ,dont know the poundage yet.but will be changing the springs as zetec is going in
|
|
|
James
|
| posted on 23/2/07 at 01:31 PM |
|
|
I bought Protechs from Mk about 3/4 years ago.
Pretty sure they're the 2.25" ones.
Cheers,
James
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
|
Jay k
|
| posted on 23/2/07 at 01:36 PM |
|
|
I e-mailed MK and they say they are 1.9" and the poundage would be 350 front and 200 rear.
MNR sell the 1.9" for £315
2.25" for £340
MK then sell the 1.9" for £350
If the 2.25" can be used I think I will go with them from MNR.
Cheers, Jamie.
|
|
|
ReMan
|
| posted on 23/2/07 at 01:38 PM |
|
|
The ones MK supplied me with my kit were from memory 350lb
I changed them for 200lb for a light Fireblade build and they are only wound a couple of turns up.
|
|
|
