Paul TigerB6
|
| posted on 12/7/07 at 11:22 AM |
|
|
MK 04-06 R1 manifold
Does anyone have a pic of their above manifold at all?? I am actually trying to figure out where to position my engine into my Tiger as i am planning
on using the MK 4-2-1 manifold.
Cheers
Paul
|
|
|
|
|
locoboy
|
| posted on 12/7/07 at 11:49 AM |
|
|
Dont do it!
Well non until you have at least borrowed one because i mounted my R1 in an MK cradle in a GTS chassis with a MK exhaust and found i needed the whole
system to be able to position the engine in the right place to allow my exhaust to look right.
Bit of a pain in the ass as i had to buy the whole system about 6 months before i actually needed it but it has saved a lot of hassle later on.
ATB
Locoboy
|
|
|
Paul TigerB6
|
| posted on 12/7/07 at 01:19 PM |
|
|
If i dont fit the engine and weld the brackets on i cant paint the chassis up at all. That obviously means i cant do anything on the car at all. I may
actually trailer the car over to MK as the Tiger chassis is about 2" narrower right across the car, and looking at the propshaft angles i am
going to need to fit the engine closer to the passenger side than in the MK by the looks of a few pics i have found anyway due to this.
|
|
|
