Hammerhead
|
| posted on 19/7/07 at 12:33 PM |
|
|
Borrow sierra offset wheels (Nottingham)
Hi Guys.
This is my situation:
I am attempting to use some enclosed bodywork on my MK Indy chassis. The wheels I have at the moment are for a lotus 340r which I would really like to
use, I have had some hub adaptors made to fit these to the sierra hubs/uprights.
Fronts are 195s rears are 225s.
However the wheels stick out from the bodywork by about 20mm each side.
What I could do with is borrowing a sierra offset wheel (if it's the same at the back as the front, if not I need a front and a rear) to see if
it will sit under the bodywork.
If anyone can lend me the required wheels I would be very thankful. I can collect or if you would prefer to be present then thats fine too. I live
near Bleasby Notts.
Cheers.
Steve.
[Edited on 19/7/07 by Hammerhead]
|
|
|
|
|
bilbo
|
| posted on 19/7/07 at 01:10 PM |
|
|
Hi Steve,
Is that Bleasby near Southwell? Didn't realised you were so close  I've got 5 sierra steel wheels sat in my garage in Bingham.
You're more than welcome to come over and borrow what you need. I'll U2U my address.
Cheers,
Bill
---------------------------------------
Build Diary: http://bills-locost.blogspot.com/
Web Site: http://locost.atspace.com
|
|
|
Hammerhead
|
| posted on 19/7/07 at 01:17 PM |
|
|
Thanks Bilbo for the U2U.
Yes Bleasby near Southwell. Interesting that you are using a Rover engine too!
Is saturday between 4:30 - 5 be OK for you?
Cheers.
Steve.
|
|
|
bilbo
|
| posted on 19/7/07 at 01:34 PM |
|
|
I'm seeing my folks on Saturday afternoon, but I should be back by 5:30 - 6 if that's OK? Alternatively, I'll be in all day
Sunday.
Cheers,
Bill
---------------------------------------
Build Diary: http://bills-locost.blogspot.com/
Web Site: http://locost.atspace.com
|
|
|
