Razor
|
| posted on 18/9/07 at 11:37 AM |
|
|
sva manual
how important is it to have a sva manual while building your car? and if yes where can i buy one from?
Rich
|
|
|
|
|
worX
|
| posted on 18/9/07 at 11:39 AM |
|
|
As you are building a manufacturer's kit car, then I would say not that important to be honest...
Steve
|
|
|
nib1980
|
| posted on 18/9/07 at 11:41 AM |
|
|
don't buy go here
http://www.rootpeg.net/SVAMarch2004.pdf
|
|
|
RazMan
|
| posted on 18/9/07 at 12:05 PM |
|
|
Most of the sva requirements are more common sense than anything else but there are a few areas which need to be exact (lighting issues predominantly)
so download the manual in the posted link and use it as a reference guide but don't get obsessed by some of the extreme detail stuff.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
Hellfire
|
| posted on 18/9/07 at 12:05 PM |
|
|
SVA manuals are useful and handy to have but with a resource like Locostbuilders at your fingertips, it's not essential. 
Phil
[Edited on 18-9-07 by Hellfire]
|
|
|
fuzzy!!
|
| posted on 18/9/07 at 02:20 PM |
|
|
quote:
Originally posted by RazMan
..... but don't get obsessed by some of the extreme detail stuff.
is this extreme? "Bend radii should exceed 3 times the tube diameter. Where tubes are ovalised .... the ratio d/D should not be less than
0.9"  !! (section Annex1 Page3)
|
|
|
RazMan
|
| posted on 18/9/07 at 03:03 PM |
|
|
Thats exactly what I mean - jeeez I doubt that even the sva tester would know that one!
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
Razor
|
| posted on 18/9/07 at 05:06 PM |
|
|
cheers ppl, that helps alot, i do love this site for its helpfullness, on and complete note rang mk today, my kit should be ready to collect next
saturday, yay !!!
Rich
|
|
|
Razor
|
| posted on 18/9/07 at 05:07 PM |
|
|
cheers ppl, that helps alot, i do love this site for its helpfullness, on a completely different note rang mk today, my kit should be ready to
collect next saturday, yay !!!
Rich
|
|
|
Hellfire
|
| posted on 18/9/07 at 05:22 PM |
|
|
So come on then, spill the beans. What engine are you fitting and will you be frequenting the BEC section??...................
Phil
|
|
|
Razor
|
| posted on 18/9/07 at 11:51 PM |
|
|
yeh, i have a R1 engine ready and waiting to be fitted, saw your car at donntington, wanted to meet you and have a good look round it but sadly you
werent around at the time.
|
|
|
Hellfire
|
| posted on 19/9/07 at 11:45 AM |
|
|
If you're collecting your kit from MK on Saturday, one of us will probably be there (provided it's not raining). You're quite
welcome to have a look around it.
Phil
|
|
|
Razor
|
| posted on 21/9/07 at 10:11 AM |
|
|
every time ive been up there has always been some one there its like a becon lol, but if there is that would be great more photos and advice the
better, thanks everyone
Rich
ps its the 29th if all goes to plan and ppl fancy a drive up weathr permiting
|
|
|
