jabbahutt
|
 posted on 18/9/07 at 12:52 PM |
|
|
side repeater postion
Afternoon all
Bought myself some side repeaters at Donnington and would like to check where on the Indy is best to fit them to meet visability requirements for SVA.
I was thinking about on the side of the scuttle but not sure where abouts is suitable for SVA
Any advice much appreciated prior to putting large holes in my body work.
Thanks
Nigel
|
|
|
|
|
mike smith1
|
| posted on 18/9/07 at 12:56 PM |
|
|
Mine are fitted in the side of the scuttle, however other builders have put them into the side panels, so i would say its down to personal prefernce,
i feel they are more visible on the side of the scuttle though!
Mike
|
|
|
graememk
|
| posted on 18/9/07 at 01:35 PM |
|
|
i havent got any as my lights have them on the rear of the head lamps.
|
|
|
BenB
|
| posted on 18/9/07 at 01:45 PM |
|
|
I'd recommend getting some yellow post-it note type stickers, a copy of the SVA manual page for side-repeaters and half-an-hours fiddling in the
garage. Mine passed fine as shown.....
|
|
|
whitestu
|
| posted on 18/9/07 at 03:14 PM |
|
|
Mine are on the side panels.
stu
|
|
|
.JPG)
