Stuart_B
|
| posted on 23/12/07 at 05:39 PM |
|
|
Nuts and Bolts
Hi, i have just started to build my mk indy and i need some nuts and bolts but i do not know what size and how many off?
Stuart
|
|
|
|
|
martyn_16v
|
| posted on 23/12/07 at 06:16 PM |
|
|
That's a bit of a vague question 
I bought a mixed bag of metric from namrick and it's done me well so far, I have had to order a few more bits here and there (some of the odder
ones, like M12x50 socket caps for the diff) but not doing too badly. Make sure you have plenty of M8 nylock nuts though. All of the suspension bolts
should come with the kit.
|
|
|
Stuart_B
|
| posted on 23/12/07 at 06:21 PM |
|
|
hi, martyn_16v it was a bit of vague question but i have just started so i am not to sure on what type or size i need.Lol
I have done all the suspension and shocks to day.
|
|
|
paulmw
|
| posted on 24/12/07 at 04:06 PM |
|
|
Its a bit difficult to specify every nut and bolt as it depends on your build. My advice is as above and buy a big back of mixed set screws, bolts,
nylocs etc. Make sure they are 8.8 grade though.
Oh, and a load of 5mm rivets
www.carbuildersolutions.co.uk do a set
Paul
|
|
|
.jpg)
