Stuart_B
|
| posted on 23/6/08 at 06:08 PM |
|
|
embossed plastic interior panel set
hi all, does the mk indy delux kit come with the embossed plastic interior panel set, it is says it does on there website but when i got mine it did
not come with it?
did i get done?
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
|
|
afj
|
| posted on 23/6/08 at 06:15 PM |
|
|
think you can choose ally or plastic i got plastic
|
|
|
paulmw
|
| posted on 23/6/08 at 06:43 PM |
|
|
Deluxe kit comes with 4 black plastic panels only
Rear bulk head, and 3 tunnel panels
Paul
|
|
|
LBMEFM
|
| posted on 23/6/08 at 07:16 PM |
|
|
Don't think you got done they just missed them out, give them a call they will send them down. They are good guys but, sometimes, not to well
organised
Barry
|
|
|
eznfrank
|
| posted on 23/6/08 at 07:29 PM |
|
|
Yeah I got some in mine although TBH I'll probably just use them as a rough template for something else.
|
|
|
Mark G
|
| posted on 23/6/08 at 07:44 PM |
|
|
I got plastic with mine too,
Go carefull using them as a template as they are oversized and need cutting down to size.
|
|
|
Stuart_B
|
| posted on 23/6/08 at 07:50 PM |
|
|
this was in november when i picked up the kit through.
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
Mark G
|
| posted on 23/6/08 at 07:59 PM |
|
|
Still worth a call to them, they may be kind enough to send you out a set.
|
|
|
Stuart_B
|
| posted on 23/6/08 at 08:00 PM |
|
|
have you got a picture of what it is?
thanks
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
Mark G
|
| posted on 23/6/08 at 08:36 PM |
|
|
not a very good photo as I haven't actually got around to using them yet.
Mine came all taped together as you can see there. I think there should be one piece for behind the seat, 2 transmission tunnel sides and a 2 piece
transmission tunnel top.
|
|
|
tootall
|
| posted on 23/6/08 at 11:23 PM |
|
|
they missed them out of my kit too i picked them up on friday dinner time 1 rear bulk head pannel 2 tunnel sides and 1 tunnel top cut to right shape
but about 10 mm to big on every side so need trimming!
i asked for ally ones but would have been extra and was advised they would be hard to keep lookin nice!
some people dream of sucsess, others just get on and do it !!
|
|
|
Stuart_B
|
| posted on 24/6/08 at 11:39 AM |
|
|
i have made all mine now out of alu.
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
iscmatt
|
| posted on 3/7/08 at 12:22 PM |
|
|
yeah they missed mine out, but i had to go and see them for something so i mentioned it when i was there and they just whipped out a big sheet of the
stuff and cut me the bits i needed
|
|
|
.jpg)
