mad4x4
|
| posted on 2/8/03 at 09:20 AM |
|
|
Brakes - FORD
The front brakes on an Indy - If using for calipers can anyone out there tell me the thread size for the hole that the flexi hoses screws into. Is it
Metric or UNF. I need this before I Can purchase my SS brake lines from Raceparts.
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
|
|
bob
|
| posted on 2/8/03 at 05:53 PM |
|
|
Metric M10
In fact i think the whole brake set up is M10 on as mine was sierras as mine was.
|
|
|
mad4x4
|
| posted on 3/8/03 at 10:53 AM |
|
|
Thanks thats a great help
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
Mark&Alice
|
| posted on 5/8/03 at 09:01 AM |
|
|
Additional
We had the same question a while ago..
It IS M10, but it is also FINE pitch....
To make matters more complicated, there are 3 types of fine pitch.
The correct pitch is 1.25!
Toodle pip
Mark
|
|
|
MK7
|
| posted on 5/8/03 at 04:30 PM |
|
|
It's M10 x 1.0mm pitch, not 1.25mm
|
|
|
