worX
|
| posted on 15/3/08 at 08:53 PM |
|
|
Diff Codes ( Ford Sierra Diff codes, Differential Codes, Diff Numbers, Sierra Diff )
Ford axle codes
A=3.36 B=3.77 D=3.92 F=3.842 J=4.056 K=3.31 M=3.14 N=4.29 P=3.58 J=3.62 V=3.33 Z=3.59 2=4.27 3=3.62 4=3.82 5=3.26 6=3.12 8=3.56
3,14 CW47-Pin15
3,38 CW44-Pin13
3,62 CW47-Pin13
3,92 CW51-Pin13
3,77 CW49-Pin13 6.5 inch diff
3,38 fitted to 1,6 OHC ECO 5 speed
3,38 fitted to 2,0 OHC HC
3,38 fitted to 2.3 v6 ESTATE
3,14 fitted to 1,6 OHC ECO 4 speed
3,14 fitted to 2.3 v6 SALOON
3.14 fitted to 2.3 Diesel
85GG 4006 DC --- 3.97
85GG 4006 BC --- 3.62
85GG 4006 AC --- 3.38
85GG 4006 FB --- 3.36
87BG 4006 GB --- 3.14
86GG 4006 AAA --- 3.92 LSD
V87BB 4006 BAA --- 3.62 LSD
V87BG 4006 CAA --- 3.38 LSD
85GG 4006 AAA --- 3.36 LSD
Vin plate codes for Diff ratio
Ratio Code
3.14 M
3.36 A
3.38 V
3.62 U
3.64 3
3.92 D
FOZZIE/CHRIS - CAN THIS BE MADE INTO A STICKY AS IT COMES UP QUITE OFTEN AND I THINK IT WOULD BENEFIT QUITE A FEW PEOPLE...
Cheers,
Steve
[Edited on 15/3/08 by worX]
|
|
|
|
|
bob
|
| posted on 15/3/08 at 08:59 PM |
|
|
Info like this should really be a sticky at the top of the running gear section.
can chris or fozzie make that happen as it would save people a lot of time sifting through the site.
nice work steve 
|
|
|
worX
|
| posted on 15/3/08 at 09:03 PM |
|
|
Sorry - I put it in here, as I thought it was more applicable in the tranmission section!
Could it also be moved and then become a sticky pretty please...
Steve
|
|
|
bob
|
| posted on 15/3/08 at 09:04 PM |
|
|
hells teeth that was quick
|
|
|
bob
|
| posted on 15/3/08 at 09:07 PM |
|
|
steve
I think your right, its probably either or, we should really have more info like this stuck at the top, seems a lot of other forums do it and saves
the searching.
|
|
|
Fozzie
|
| posted on 15/3/08 at 09:08 PM |
|
|
Excellent work Steve... 
I've 'stickied' it
Fozzie
'Racing is Life!...anything before or after is just waiting'....Steve McQueen
|
|
|
worX
|
| posted on 15/3/08 at 09:09 PM |
|
|
Gracias
quote:
Originally posted by Fozzie
Excellent work Steve...
I've 'stickied' it
Fozzie
|
|
|
big_wasa
|
| posted on 15/3/08 at 09:14 PM |
|
|
Nice one but it conflicts with what I asked last week.
Link
That means Ive left a 3.38 sat in the scrapie 
Thats a bit like leaving pound notes there
|
|
|
paulmw
|
| posted on 15/3/08 at 09:17 PM |
|
|
Fluent in Spanish and good looking. Does this boys talents never cease
quote:
Originally posted by worX
Gracias
quote:
Originally posted by Fozzie
Excellent work Steve...
I've 'stickied' it
Fozzie
|
|
|
Hellfire
|
| posted on 15/3/08 at 09:21 PM |
|
|
Steve, the VIN plate ratio codes are incorrect. The 3.62 is U
Phil
|
|
|
worX
|
| posted on 15/3/08 at 09:25 PM |
|
|
My post was mainly to get it up there as a "sticky" and I just copied the info from Fesycresy post last week, so if someone (a damn sight
more!) knowledgeable than me can clarify the details please I will amend the opening post to reflect the correct ratios and codes...
Steve
This is Previous post:
U is a 3.62:1
code list below will help
M=3.14 (7" or 7.5"
A=3.36 (7.5"
V=3.38 (7"
U=3.62 (7"
3=3.64 (7.5"
9=3.91 (7.5"
D=3.92 (7"
quote:
Originally posted by big_wasa
Nice one but it conflicts with what I asked last week.
Link
That means Ive left a 3.38 sat in the scrapie
Thats a bit like leaving pound notes there
|
|
|
worX
|
| posted on 15/3/08 at 09:27 PM |
|
|
Cheers Phil.
I've edited it to suit...
Is the 3.64 3 Ratio correct or should it be a B?
quote:
Originally posted by Hellfire
Steve, the VIN plate ratio codes are incorrect. The 3.62 is U
Phil
[Edited on 15/3/08 by worX]
|
|
|
big_wasa
|
| posted on 15/3/08 at 09:34 PM |
|
|
Thats all good then
|
|
|
worX
|
| posted on 15/3/08 at 09:35 PM |
|
|
Hope So!
But if not I'll keep checking back to see if anyone else has a more accurate opinion!
Steve
|
|
|
TimC
|
| posted on 15/3/08 at 10:24 PM |
|
|
Low ratios in the 1.6 eh? Guess what I'm checking tomorrow - c'mon baby, be low.....
|
|
|
TimC
|
| posted on 16/3/08 at 01:07 PM |
|
|
Bugger!
|
|
|
Dannysc698
|
| posted on 28/3/08 at 10:24 AM |
|
|
hi does anyone have a sierra diff ratio 3,92 CW51-Pin13 any help appreciated
07717882313 or email me on dandanracing@hotmail.com as i wont come on here often
cheers
danny
|
|
|
tks
|
| posted on 4/5/08 at 01:19 PM |
|
|
3.92 LSD = fitted to the XR4x4i 2.0 Sierra
The above comments are always meant to be from the above persons perspective.
|
|
|
bjohnson
|
| posted on 25/10/08 at 08:30 PM |
|
|
Great info thanks.
|
|
|
WIMMERA
|
| posted on 16/11/08 at 06:40 AM |
|
|
I have been offered a Sierra diff and driveshafts, the vendor tells me the tag on the diff reads
83 BG 4006 AC
4A 377 3D14
Does anybody know the ratio.
Sierras were never sold in Oz so knowledge of codes etc is limited
here.
Cheers
Wimmera
|
|
|
Jason Fletcher
|
| posted on 6/3/09 at 11:37 PM |
|
|
I think thats a 3.77 ratio. Even though its rarer than even a 3.14 it not a desirable ratio.
Jason
|
|
|
Jason Fletcher
|
| posted on 6/3/09 at 11:40 PM |
|
|
Just though I'd add that 3.36 ratio diffs can be found in 2.0 auto sierra estates and there are a few around.
Jason
|
|
|
MikeFellows
|
| posted on 3/8/09 at 05:48 PM |
|
|
Ive a diff from a 1990 2.0 DOHC
stamped on one side with 06625
on the other side it has
83BG-4025-BE
could anyone confirm what it is?
Thanks
|
|
|
mad4x4
|
| posted on 28/8/09 at 11:33 AM |
|
|
Any word on what DIFF was in the 1.8 CVH (h' Reg) that has a 5 Speed type 9.
[Edited on 28/808/09 by mad4x4]
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
ZEN
|
| posted on 28/8/09 at 07:47 PM |
|
|
I had a 1.8 CVH sierra from 1989. It was a 3.92 ratio.
quote:
Originally posted by mad4x4
Any word on what DIFF was in the 1.8 CVH (h' Reg) that has a 5 Speed type 9.
[Edited on 28/808/09 by mad4x4]
My YouTube channel Cars, bikes - track days, motorsport, sim racing and more.
|
|
|
