eccsmk
|
| posted on 23/3/08 at 07:28 PM |
|
|
rear wing trim
what have people put between their rear wings and side/rear panels??
also where can i get some
thanks 
|
|
|
|
|
worX
|
| posted on 23/3/08 at 07:30 PM |
|
|
"Tadpole" Trim and it's available from loads of places including your manufacturer!
Steve
|
|
|
Guinness
|
| posted on 23/3/08 at 07:31 PM |
|
|
Tadpole trim.
http://www.woolies-trim.co.uk/c-322-extrusion.aspx
I think I used R97.
There will be other suppliers, like Car Builder Solutions, or Europa.
HTH
Mike
|
|
|
Guinness
|
| posted on 23/3/08 at 07:33 PM |
|
|
http://www.cbsonline.co.uk/wing-piping--trmpi-1569-p.asp
HTH
Mike
|
|
|
eccsmk
|
| posted on 23/3/08 at 07:39 PM |
|
|
thanks folks been messing with u-trim and plain round trim for ages
|
|
|
Johneturbo
|
| posted on 23/3/08 at 07:50 PM |
|
|
slight hijack!
what trim do you guys use for around the seat harness holes, i've got standard grp seats.
|
|
|
eccsmk
|
| posted on 23/3/08 at 07:55 PM |
|
|
i used u trim from woolies follow the link in the top post by guiness
|
|
|
Guinness
|
| posted on 23/3/08 at 07:59 PM |
|
|
Word of warning here, use the "Herringbone Trim, with sprung steel insert" rather than plain u trim!
http://www.woolies-trim.co.uk/c-330-pvc-edge-trims.aspx
I watched in horror as the u-section trim on my front wings came off on the by-pass at 70mph on my way to the SVA!
HTH!
Mike
|
|
|
Johneturbo
|
| posted on 23/3/08 at 08:03 PM |
|
|
hmmm on the way to sva isn't good! normally it falls off after the sva
thanks for the link
[Edited on 23/3/08 by Johneturbo]
|
|
|
