ss1turbo
|
posted on 30/1/09 at 08:35 PM |
|
|
MX6/Probe V6 and RWD gearbox
I've heard that the MX6/Ford Probe engine mounts stright up to an MX5 gearbox - is this true? Anyone got a pic of one?
Long live RWD...
|
|
|
blakep82
|
posted on 30/1/09 at 08:39 PM |
|
|
clairetoo will know i think
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
zilspeed
|
posted on 30/1/09 at 08:39 PM |
|
|
quote: Originally posted by ss1turbo
I've heard that the MX6/Ford Probe engine mounts stright up to an MX5 gearbox - is this true? Anyone got a pic of one?
I think Clairetoo is your woman for this question.
|
|
liam.mccaffrey
|
posted on 30/1/09 at 08:49 PM |
|
|
she told me the following when I asked her about it
Quote Claire:
It was'nt as straightforward as I thought it was going to be when I started the job..... the V6 fits to the Mx5 box , but doesn't bolt
to it - I finished up making an adapter plate and then an ally flywheel(to move the clutch back by the thickness of the plate) . I allso had to mod
the gearbox to fit the starter motor .
Build Blog
Build Photo Album
|
|
ss1turbo
|
posted on 30/1/09 at 09:07 PM |
|
|
Not a bolt on job, then...somehow it had got into my head the two bolted together somehow!
I was thinking of an alternative to the Mondeo V6/Jag S type manual gearbox combo given the rarity of the Jag box..
An other V6 combos that are a bit easier to get hold of?
Long live RWD...
|
|
clairetoo
|
posted on 30/1/09 at 09:13 PM |
|
|
Hi - just back from a quick spin
The Ford Probe/Mx6/626 is a nice engine - and well worth the effort involved in fitting it !
It can be done just with an adapter plate and a spacer behind the flywheel , I had to make a special flywheel for mine as I didnt have space in the
Fury to move the starter back even a few mm
I am just making a couple of adapter plates and a flywheel spacer , and Mx5 box's can be had for as little as £40 (so cutting a bit out for the
starter is not such a bad thing )
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
grazzledazzle
|
posted on 30/1/09 at 10:03 PM |
|
|
Well my st200 mondeo v6 goes onto a cosworth t5 with a custom adapter plate. You can buy an off the shelf bell housing to do it now too.
|
|
coozer
|
posted on 31/1/09 at 12:01 PM |
|
|
The Aston Martin V12 is basically two Ford V6's so will the Aston box bolt straight on?
Same box to be found in the Vauxhall Monaro if you find one...
1972 V8 Jago
1980 Z750
|
|
locost_bryan
|
posted on 5/2/09 at 02:07 AM |
|
|
Another KL V6 to Miata conversion here.
Other V6 options?
Vauxhall 2.5 to Carlton 5-speed
Alfa 2.5/3.0 to 75 (?) 5-speed
Mitsubishi FTO 2.0 to Starion 5-speed
iirc Monaro uses Tremec 6-speed, same as Corvette and Aston Martin
Bryan Miller
Auckland NZ
Bruce McLaren - "Where's my F1 car?"
John Cooper - "In that rack of tubes, son"
|
|
stevebubs
|
posted on 5/2/09 at 02:55 AM |
|
|
quote: Originally posted by coozer
The Aston Martin V12 is basically two Ford V6's so will the Aston box bolt straight on?
Same box to be found in the Vauxhall Monaro if you find one...
2 x V6s in a custom crank case....I'd be doubtful...
|
|