Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: MK Indy R Radiator
barbarianbeast

posted on 26/3/09 at 06:27 PM Reply With Quote
MK Indy R Radiator

as above, How??

i haven't got the slightest clue as to how this should go on. Its the one that MK supplied, i think its a modified escort one.

how do i mount it without fouling the inboard suspension or the nose cone? how far out/up/down should it be.
any advice or even a link to a build diary appreciated.

View User's Profile View All Posts By User U2U Member
lococost

posted on 26/3/09 at 07:19 PM Reply With Quote
you can find a link to my build on the www button below. There are some pics of the rad in there somewhere. I did use the original bike radiator (and oil cooler below it) though.
View User's Profile View All Posts By User U2U Member
raptor700
Contributor






Posts 241
Registered 28/2/09
Member Is Offline

Photo Archive Go!
Building: MK INDY R GSXR 1000 K5. Now sold..... Ready for th

posted on 26/3/09 at 07:46 PM Reply With Quote
i have just fitted mine to an indy r, it is a modified escort and if you have a bike engine they will have modified the outlets.

They supply two brakets that are about half inch bar, it is bent and looks roughly like a g clamp you then paint it and fit your rad. You need to get the top hose above the head gasket, i have just been down yesterday they are doing an ally header tank for 50 quid it looks good and the right size for the pipework i also bought a pipe that is bent to shape that takes fluid from the far end of the engine to the bottom of the rad as its quite a long way. if you havent got the clamps i would buy them, i had to scratch my head a few times, if you want me to put a pic on let me know

nik

View User's Profile E-Mail User View All Posts By User U2U Member
barbarianbeast

posted on 26/3/09 at 08:15 PM Reply With Quote
lococost, i am impressed with your build. and the way the way you have made the clutch linkage i might have to borrow that. thank you

raptor 700, i think its time i spoke to MK. i have bought the rad brackets but they must be wrong. (or off the older car, they are L shaped) could you send that pic please.
that expansion tank sounds good do they have those in stock.

View User's Profile View All Posts By User U2U Member
raptor700
Contributor






Posts 241
Registered 28/2/09
Member Is Offline

Photo Archive Go!
Building: MK INDY R GSXR 1000 K5. Now sold..... Ready for th

posted on 26/3/09 at 08:32 PM Reply With Quote
if you imagine a g clamp with the g part at the top when the suspension moves up and down it doesn catch the bracket, if you get them and still need the pics let me know, i wasn too shore and put a thread on myself, but the top of the radiator sits flush with the top of the bracket saves you messing as i had the nose cone on and off!!!!

i actually saw it on the side and asked, they are making them up tho so give em a buzz, i have been looking for one on ratsport but the fittings aren the right sizes with it been a bike. it looks a good one!!

View User's Profile E-Mail User View All Posts By User U2U Member
PAUL FISHER

posted on 26/3/09 at 08:56 PM Reply With Quote
This is how I mounted my MK supplied radiator,on my old Indy R.
View User's Profile E-Mail User View All Posts By User U2U Member
barbarianbeast

posted on 26/3/09 at 09:44 PM Reply With Quote
thanks for the picture, it seems straight forward now.
have you drilled straight through that chassis member and used a stantard bolt?

View User's Profile View All Posts By User U2U Member
PAUL FISHER

posted on 26/3/09 at 10:44 PM Reply With Quote
quote:
Originally posted by barbarianbeast
thanks for the picture, it seems straight forward now.
have you drilled straight through that chassis member and used a stantard bolt?


Just used rivnuts in the front chassis rail.

View User's Profile E-Mail User View All Posts By User U2U Member
paulmw

posted on 27/3/09 at 02:15 PM Reply With Quote
Mine with a bike rad. Just a couple of simple brackest top and bottom Rescued attachment PICT1812.JPG
Rescued attachment PICT1812.JPG

View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.