Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Gearbox oil Cooler
Cubby

posted on 3/8/10 at 08:17 PM Reply With Quote
Gearbox oil Cooler

Thinking of using a gearbox oil cooler . Not a clue what I need .Has anyone done this and can point me in the right direction on whats needed and how to install successfully and where to buy the items.

Many Thanks

View User's Profile View All Posts By User U2U Member
rusty nuts

posted on 3/8/10 at 08:23 PM Reply With Quote
Why?
View User's Profile View All Posts By User U2U Member
balidey

posted on 3/8/10 at 08:26 PM Reply With Quote
quote:
Originally posted by rusty nuts
Why?

Exactly. The 'correct' way to do this is to first fit a temp gauge, then run it and see if you need a cooler. As often too cool oil can be just as bad as too hot.

But if you do want one then there are plenty of tin tops that have them as standard, so maybe rob some bits from a scrapper?





Dutch bears have terrible skin due to their clogged paws

View User's Profile View All Posts By User U2U Member
Cubby

posted on 3/8/10 at 08:36 PM Reply With Quote
Yes I'm fitting a temp guage at present to check out a theory that my gearbox(s) failure issues are due to overheating . If so a cooler might be my saviour.
View User's Profile View All Posts By User U2U Member
rusty nuts

posted on 3/8/10 at 08:43 PM Reply With Quote
Which gearbox? what oil are you using? Were the gearboxes second hand or reconditioned? Are you using a quickshift? I seriously doubt that oil temperature will cause gearbox failure , more likely the wrong oil, worn internals, or using a quick shift for fast changes especially when used on a type 9 box that suffer from synchro ring problems.
View User's Profile View All Posts By User U2U Member
Cubby

posted on 3/8/10 at 08:58 PM Reply With Quote
Rusty the boxes are both MT75 and both reconditioned (by two different companies) . In a few hundred miles both displayed similar issues that is load werring noise when in neutral and car stationery. No gear whining when car moving ,no issues selecting gears etc. All works fine apart from this annoying worn bearing type sound. noise loudens as gbox oil heats up with use. Changed spigot bearing on both occasion and changed clutch release bearing as well .
The first box I used MT75 oil from my local ford dealers but the second box as used Millers Oil.

[Edited on 3/8/10 by Cubby]

View User's Profile View All Posts By User U2U Member
Stott

posted on 3/8/10 at 09:19 PM Reply With Quote
MT75s were in cossies right?

If so they suffered from an idle chatter and an overrun growl with certain clutches fitted. My dads saph had idle chatter on the std clutch, Brooklyn replaced it under warranty for an EsCos clutch which solved this but gave a bit of overrun growl, but more bearable than the chatter.

Just a thought.

View User's Profile View All Posts By User U2U Member
snapper

posted on 3/8/10 at 09:25 PM Reply With Quote
A gearbox does not have an oilpump so you would need an electric one and probably a filter





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
Canada EH!

posted on 3/8/10 at 10:10 PM Reply With Quote
Normally the only time coolers are required for the transmission and differential is indurance racing, two or more hours.
The normal practice is an electric pump with lines to a cooler and temp guages. The pumps can not be turned on until the oil gets very hot, and therefore thin enough to pump.
Nascar and some 12 and 24 hour cars use this system, but it is not needed for sprint racing

View User's Profile View All Posts By User U2U Member
RazMan

posted on 4/8/10 at 08:26 AM Reply With Quote
I have to agree with Rusty here. On a road car, oil temp will more than likely not be your problem. In fact I can't think of any way to install a cooler as there is no pump or circulation. It has to be a bearing or misalignment somewhere.

[Edited on 4-8-10 by RazMan]





Cheers,
Raz

When thinking outside the box doesn't work any more, it's time to build a new box

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
britishtrident

posted on 4/8/10 at 10:37 AM Reply With Quote
quote:
Originally posted by Stott
MT75s were in cossies right?




They used the T5 same as the Rover75 V8 & the Mustang.





[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]

View User's Profile View All Posts By User U2U Member
02GF74

posted on 4/8/10 at 03:42 PM Reply With Quote
quote:
Originally posted by snapper
A gearbox does not have an oilpump so you would need an electric one and probably a filter







View User's Profile View All Posts By User U2U Member
02GF74

posted on 4/8/10 at 03:42 PM Reply With Quote
quote:
Originally posted by snapper
A gearbox does not have an oilpump so you would need an electric one and probably a filter







View User's Profile View All Posts By User U2U Member
02GF74

posted on 4/8/10 at 03:42 PM Reply With Quote
quote:
Originally posted by snapper
A gearbox does not have an oilpump so you would need an electric one and probably a filter







View User's Profile View All Posts By User U2U Member
02GF74

posted on 4/8/10 at 03:44 PM Reply With Quote
quote:
Originally posted by snapper
A gearbox does not have an oilpump so you would need an electric one and probably a filter



^^^ wot 'e said.

there are some Land Rover/Range Rover auto boxes that have pumps and have coolers but that is the exception rather than the rule.

you could replace the gearbox oil with a water/milk mix so when the 'box breaks down, add a tea bag and enjoy a cuppa waiting for the AA/RAC man.






View User's Profile View All Posts By User U2U Member
Stott

posted on 4/8/10 at 05:51 PM Reply With Quote
quote:
Originally posted by britishtrident
quote:
Originally posted by Stott
MT75s were in cossies right?




They used the T5 same as the Rover75 V8 & the Mustang.


BWs were only in the 2WD I believe, MT75 in the 4x4s

My thinking was although it's not the 4x4 box in this case, it's an MT75 so the inp shaft may have the same problems when a funny clutch is on it

EDIT: my dads faulty one was a 93 saph, 4x4 so had the 75 in it and a fault which sounds just like this

[Edited on 4/8/10 by Stott]

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.