whitstella
|
 posted on 17/7/11 at 07:37 PM |
|
|
gear lever
hi
just moving onto my next job after my brake pipes, anyway i have a type 9 box with gear lever in the usual place and i have got an adaptor to move the
gear lever towards the back of the car only about 100mm. how does the piece of kit work and does anybody know what the hell im going on about. it was
bolted on when i got the car but i doesn't do anything not even select a gear. i will try to post a pic if you need to see what i have got and
possible what am i missing.
cheers fokes
|
|
|
|
|
Kev36
|
| posted on 18/7/11 at 10:08 AM |
|
|
Hi, im having a similar issue.
bought the extension kit on ebay. there is a key which should fit in. but in my case the key is too wide to fit in.
(type 9) anybody fitted this kit?
thanks
kev
' A rich man is just a poor man ...with an awful lot of money..'
|
|
|
Miks15
|
| posted on 18/7/11 at 10:40 AM |
|
|
a picture would probably be the easiest way to see what is going on.
|
|
|
JeffJeffers
|
| posted on 19/7/11 at 12:27 PM |
|
|
Is this the part?
This is a part that Rally Design and Westfield supply.
It just bolts in place of the gear lever then the gear lever bolts in to it. Like you say it moves the lever back about 100mm.
|
|
|
whitstella
|
 posted on 19/7/11 at 09:28 PM |
|
|
hi
all sorted now thanks i was missing the bit off the end where the gearlever goes.
cheers steve
|
|
|
