Hugh_
|
posted on 12/3/12 at 10:20 AM |
|
|
WTD: short Pinto inlet manifold for 45s
Im after a short (max ~2" inlet manifold for Pinto to Weber/Dellorto 45s.
Thanks
Hugh
|
|
|
andyace
|
posted on 12/3/12 at 02:24 PM |
|
|
Would these do ..... Not exactly locost at £160 though
FORD OHC PINTO KIT CAR INLET MANIFOLD WEBER 45 DCOE x2 | eBay![](http://rover.ebay.com/roverimp/1/710-53481-19255-0/1?ff3=2&pub=5574934589&toolid=10001&campid=5336738914&customid=&item=123456&mpt=[CACHEBUSTER])
|
|
snapper
|
posted on 12/3/12 at 03:25 PM |
|
|
Hugh, I have one spare since I went bike carb.
I'm away on business until e weekend, U2U with an offer and I'll consider
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
Hugh_
|
posted on 12/3/12 at 06:29 PM |
|
|
Yep seen the eBay one, if I can get something nearer 2" that would be preferable in order to retain as much low end torque as possible. I know
a short manifold isn't ideal for this but I'm fitting an airbox and the inlet sits well forward of the carbs (ahead of the front of
bonnet) and I want it to fit inside the bodywork to avoid any difficulty securing the bonnet.
Snapper what length is your manifold?
Thanks
Hugh
|
|