leon51274
|
| posted on 8/11/12 at 02:49 PM |
|
|
Items for sale
Hi all
After buying Andy Reeve's haynes roadster i know have a bucket load of gear to sell. So the first lot is as follows.
Twin dellorto DHLA40 carbs mounted on a caterham short xflow manifold. I also fitted brand new short trumpets and new k&n filters however the
filter tops have got a little marked while in storage. These were briefly on my 1660cc crossflow and they ran fine however i believe they were jetted
for a 1700cc, although the best bet would be to have them on a rolling road for fine tuning. All gaskets and diaphragms were changed when i got them.
Asking £350.00 posted ono
Weber DGAV32 twin choke carb mounted on a standard xflow manifold complete with a k&n filter, filter case has a few marks from storage. Again, I
replaced all the gaskets etc. Asking £70.00 posted ono.
Brand new polo rad never fitted plus brand new 10" push/pull fan and fitting kit. Asking £40.00 posted ono.
Pair of 53/4" classic headlamp unit in black satin (E10 marked) Slight marks on the back but all in all very good condition Asking £60 posted
ono.
Brand new 0.750" Master cylinder kit c/w two interchangeable reservoirs suitable for remote fixing if required, also IVA ok float switch cap and
all fittings. Asking £30 posted ono.
I'm open to offers on these guys, if they don't sell I'll be banging them on the bay of e. I've also got a bucket load of
other stuff including a 2.0 zetec, good spec crossflow engine package and gearbox, type 9 box, sierra donor parts, ron champion chassis, body work,
seats and a stack more. I'll post info on the other stuff asap but if there is anything you may need then give me a shout.
Just noticed that we still appear to have a problem with images and the ott locost builder logo! so if you would like some pics then please u2u me
with an email address and I'll forward some pics onto you.
Thanks for Looking
Cheers
Leon
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
marco
|
| posted on 8/11/12 at 03:07 PM |
|
|
Hi Leon
I'll take the rad and fan please, I only live just up at Thirsk so could collect if you're in York?
Ps You don't have a diff by anychance do you?
|
|
|
leon51274
|
| posted on 8/11/12 at 03:14 PM |
|
|
Hi Marco
Great stuff. I do have a sierra diff with push in shafts, not sure what the ratio is though to be honest but if you wanted to bob down to York then by
all means we can take the cover plate of and have a butchers. All this stuff is at my Unit on Hessay Industrial estate (Just off the A59 so not quite
in York)
Cheers
Leon
|
|
|
vanepico
|
| posted on 8/11/12 at 03:24 PM |
|
|
I'll take the master cylinder and the rad if ^ changes his mind
Cheers
Pete
__________________________
Will CAD for food/money/beer...
|
|
|
leon51274
|
| posted on 8/11/12 at 03:26 PM |
|
|
No probs Pete
Cheers
Leon
|
|
|
marco
|
| posted on 8/11/12 at 05:19 PM |
|
|
quote:
Originally posted by leon51274
Hi Marco
Great stuff. I do have a sierra diff with push in shafts, not sure what the ratio is though to be honest but if you wanted to bob down to York then by
all means we can take the cover plate of and have a butchers. All this stuff is at my Unit on Hessay Industrial estate (Just off the A59 so not quite
in York)
Cheers
Leon
That will be fine Leon, PM me a contact number and the address. I can do either evenings or weekends for collection,
Looking for a bolt on shaft Diff really to swop over some internals.
Cheers Mark
|
|
|
kipper
|
| posted on 8/11/12 at 05:24 PM |
|
|
gear box
Hi leon,
I may be interested in the type 9 gearbox, u2u me with your thoughts on price.
I am based in Selby so no probs with pickup.
Regards, Denis.
Where did that go?
<<<<
|
|
|
vanepico
|
| posted on 8/11/12 at 06:15 PM |
|
|
Just managed to look at the image full size, can the master cylinder operate both the front and rear brakes with seperate circuits? Or is it one
designed to go with another and one of those bias bars? Will it be IVA acceptable by itself?
__________________________
Will CAD for food/money/beer...
|
|
|
bobthebuilder
|
| posted on 8/11/12 at 07:31 PM |
|
|
you have u2u
|
|
|
leon51274
|
| posted on 8/11/12 at 09:42 PM |
|
|
Rad and fan gone
Master cylinder gone
Bump on the rest guys and girls
|
|
|
beaver34
|
| posted on 8/11/12 at 10:12 PM |
|
|
Intrested in the lights, can you post a pic on here of them? I have lhd lights and only want to swap the lens If there the same as mine
I'm localish too so could collect
|
|
|
beardmore4072
|
| posted on 9/11/12 at 08:43 PM |
|
|
u2u sent
|
|
|
leon51274
|
| posted on 10/11/12 at 08:20 PM |
|
|
Headlights gone. Carbs now on ebay. Bucket load of other stuff to get rid of guys so if you need anything give me a shout, I'll list the other
stuff next week.
|
|
|
