mcerd1
|
posted on 24/6/13 at 02:01 PM |
|
|
OT - Painting new plaster
the new bathroom is well underway now (so I'm one step closer to getting back into the garage )
but how long should you leave new plaster to dry before painting ?
and what should I paint it with ?
I've got a new ceiling to paint white and 2 walls that I'll paint the same for now (as an undercoat for whatever colour she picks
later)
the other walls are to be tiled, but I'd rather get the worst of the painting done before the tiles go up....
the plaster was done last wed, and the tiles are due to go up this wed, and I've still got a wrist in plaster
help !!!!
-
|
|
|
rdodger
|
posted on 24/6/13 at 02:13 PM |
|
|
I use the locost method
First coat of emulsion mixed 50/50 with water. After that paint as normal.
|
|
Proby
|
posted on 24/6/13 at 02:15 PM |
|
|
^ +1 that's my usual method too.
Visit GraphicMonster
|
|
Aaron_n_Sim
|
posted on 24/6/13 at 02:37 PM |
|
|
Hi, I decorate for a living, the guys are right, we don't buy miscoat it's a bit of a DIY product, buy a cheap emulsion and add equal
parts water and mix really really well the plaster needs to be totally dry real pale pink, the miscoat will be very messy I usually do it before the
bathroom is fitted where possible!
HTH
Aaron
Work to Live don't Live to Work
|
|
Agriv8
|
posted on 24/6/13 at 02:42 PM |
|
|
Bathroom Window open and a Warm air fan to circlate the air seemed to aid the drying process when I did mine 6 Years ago.
ATB Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
jossey
|
posted on 24/6/13 at 04:36 PM |
|
|
I used to use 50/50 as above now I just pva the wall then paint.
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
Smoking Frog
|
posted on 24/6/13 at 05:53 PM |
|
|
I think if you pva it first there will be little point in thinning down as the pva will form a barrier and will stop the emulsion soaking into the
plaster.
|
|
Smoking Frog
|
posted on 24/6/13 at 06:05 PM |
|
|
Sorry don't know how to edit post but do agree with jossey, just do one or the other.
|
|
snapper
|
posted on 24/6/13 at 07:15 PM |
|
|
I water down the PVA or it forms a surface layer that can peel
Thin PVA goes in to the plaster better
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
jacko
|
posted on 24/6/13 at 07:32 PM |
|
|
Tell the Wife it will have to be left for 6 months to dry then get in the garage
Paint it in the winter
Jacko
|
|
twybrow
|
posted on 24/6/13 at 07:48 PM |
|
|
I have tried various methods, including the watered down paint, and watered down PVA. I have found all of them to be slower, and more hit and miss
than 'new plaster paint', which is branded as 'Fortress' in the DIY trade paint section. It is brilliant stuff - it covers
really well - 2 coats and you have a finished room (they do brilliant white and magnolia). It is more expensive than watered down cheap emulsion, but
I have had a brilliant finish every time, with minimal time/fuss spent.
|
|
JoelP
|
posted on 24/6/13 at 08:20 PM |
|
|
I just use normal paint. Skim plaster will be mostly dry in 24 hours, if its over bonding then it will be a lot longer in deep spots. Because the
paint soaks in, it dries immediately, so you can literally go ronud the room twice without stopping and its done.
|
|
Aaron_n_Sim
|
posted on 24/6/13 at 08:59 PM |
|
|
quote: Originally posted by JoelP
I just use normal paint. Skim plaster will be mostly dry in 24 hours, if its over bonding then it will be a lot longer in deep spots. Because the
paint soaks in, it dries immediately, so you can literally go ronud the room twice without stopping and its done.
Fresh plaster is very porous and requires a treatment any of the 3 mentioned above are fine which one to use is personal preference most professionals
just miscoat with watered down emulsion, but just painting will lead to flaking eventually!
Work to Live don't Live to Work
|
|
DavidW
|
posted on 24/6/13 at 09:03 PM |
|
|
I've found if you use standard white emulsion you can paint directly to not quite dry skimmed plasterboard and get a good finish easily.
|
|
Peteff
|
posted on 24/6/13 at 10:51 PM |
|
|
Get Dulux trade emulsion, our plasterer told us to use it when the plaster had dried to a light pink and it went on fine.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
DavidW
|
posted on 25/6/13 at 06:49 AM |
|
|
B&Q do an emulsion (at least at the trade counter) by Leyland which is cheap and surprisingly good. Before I found this, I would use Dulux trade
as above.
|
|
dhutch
|
posted on 25/6/13 at 08:56 AM |
|
|
When I looked into this (diynot forum is a good site) very few people recommend PVA with the majority stating that any old thinned down emulsion
should be fine as long as its not vinyl. Personally I have found it cheaper to buy 10l of good stuff, than 2l of 'cheap' and 5l of good. I
have also found crowns matt less good than the same priced dulux, both from BnQ.
Ive had all three bedroom ceiling replastered (two of which I also reboarded before hand) and each time was pushed for time, and painted them 24hours
later, after a day of having fans on them, using a fan heater to reduce the remaining damp areas somewhat before the paint went on. Ideal no, any
issues, no.
If it was a wall I would prefer to wait, due to the increased 'traffic' they get.
Daniel
|
|
JoelP
|
posted on 25/6/13 at 08:42 PM |
|
|
quote: Originally posted by Aaron_n_Sim
quote: Originally posted by JoelP
I just use normal paint. Skim plaster will be mostly dry in 24 hours, if its over bonding then it will be a lot longer in deep spots. Because the
paint soaks in, it dries immediately, so you can literally go ronud the room twice without stopping and its done.
Fresh plaster is very porous and requires a treatment any of the 3 mentioned above are fine which one to use is personal preference most professionals
just miscoat with watered down emulsion, but just painting will lead to flaking eventually!
Easily said but the fact is that my paint hasnt fallen off, nor has it in the customers houses where ive done that.
|
|
mcerd1
|
posted on 27/6/13 at 09:20 AM |
|
|
cheers guys
-
|
|