mkindy22
|
| posted on 18/7/05 at 03:58 PM |
|
|
tuning a blade engine
am after doing a turbo or supercharger for the blade engine just wonderin if anyone has done this or knows of any places for kits etc
|
|
|
|
|
phil_far
|
| posted on 18/7/05 at 04:03 PM |
|
|
Have alook at this excellent site:
www.best-guess.co.uk
It has all the answers for turbocharging a blade engine. Very nice/informative and helpful as well 
Cheers
Philip
|
|
|
garage19
|
| posted on 18/7/05 at 08:47 PM |
|
|
quote:
Originally posted by chris mason
try these, but make sure youv'e got plenty of money as turbo upgrade dosen't come cheap
Mine cost me £250 quid!
Maybe i should write a ron style book!
If you have the fabrication skills to weld up a manifold and plenum you can do it on the cheap.
You need an IHI RHB5 from a diahatsu chirade or early fiat uno turbo.
Lower the comp using two genuine honda head gaskets (as holeshot do on most bikes). Make sure you pressurise the float bowls with a feed from the
plenum, and use a malpassi rising rate fuel pressure regulator and you will sniffing on the doorstep of 200bhp!
See my photo section.
|
|
|
