carnut
|
| posted on 17/2/03 at 07:03 PM |
|
|
exhaust for bike engined indy
does any1 know of a good place to get an exhaust for an indy with a blackbird engine?
Im looking for an exhaust that has been specially developed for the blackbird and not anyold exhaust modified to fit like some manufacturers do.
|
|
|
|
|
Wadders
|
| posted on 17/2/03 at 08:51 PM |
|
|
Dunno where your based, but Tony Law exhausts in Leeds has a good reputation, they've been in the game years and do a lot of racing/hillclimb
cars,all their systems are custom made tuned length jobies i had a quote from them for ZX9R Headers £200-250, only problem is they only work in mild
steel.
ATB
Al
Originally posted by carnut
does any1 know of a good place to get an exhaust for an indy with a blackbird engine?
Im looking for an exhaust that has been specially developed for the blackbird and not anyold exhaust modified to fit like some manufacturers do.
|
|
|
Rorty
|
| posted on 18/2/03 at 01:02 AM |
|
|
For mild and stainless systems, try:
www.exhaustsbydesign.co.uk
And:
http://www.wunoff.co.uk/
And:
http://www.zorstec.com/
If you contact Zorstec, please tell Andy who gave you the contact, and tell him I said hello from sunny Australia!
Stainless only:
http://www.haywardandscott.co.uk/
If you want to make your own stainless system, these blokes have everything you need, from tubing, perforated tubing, bends, end plates for cans
etc:
http://www.milnerconv.co.uk/Pipe.htm
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
carnut
|
| posted on 18/2/03 at 05:43 PM |
|
|
im seriously considering making my own exhaust system but was rather hoping someone else had allready done all the calcs and were manufacturing
one.
Anyone out there running an indy blackbird? If so please get in touch.
|
|
|
carnut
|
| posted on 18/2/03 at 05:49 PM |
|
|
Ive been informed that a westfield megabird exhaust will fit. Anyone done this or know how much they cost and also if there any good?
|
|
|
Wadders
|
| posted on 18/2/03 at 09:33 PM |
|
|
Rorty
Do you have an name & address for the last link? i cant access their site, i'd like to check em out as i fancy building my own headers.
Cheers
Al
i]Originally posted by Rorty
For mild and stainless systems, try:
www.exhaustsbydesign.co.uk
And:
http://www.wunoff.co.uk/
And:
http://www.zorstec.com/
If you contact Zorstec, please tell Andy who gave you the contact, and tell him I said hello from sunny Australia!
Stainless only:
http://www.haywardandscott.co.uk/
If you want to make your own stainless system, these blokes have everything you need, from tubing, perforated tubing, bends, end plates for cans
etc:
http://www.milnerconv.co.uk/Pipe.htm
|
|
|
Rorty
|
| posted on 19/2/03 at 03:07 AM |
|
|
Wadders:
quote:
Do you have an name & address for the last link?
This should help:
MILNER OFF ROAD LTD
MATLOCK, DERBYSHIRE
TEL: 01629 734411 - FAX: 01629 733906
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
Jasper
|
| posted on 19/2/03 at 06:56 PM |
|
|
May I suggest you also try asking on the Yahoo BEC group list - there will be plenty of people running Blackbirds....
|
|
|
