pathfinder
|
posted on 3/9/06 at 10:30 PM |
|
|
Pedal plans
Hi Gents
Has anyone got any plans for a pedal box, sketches, dimensioned photos, anything!
It’s next on my list of things to do and I quite fancy making my own.
I have tried searching the boards but no joy!
Thought there was a tread for the Dax pedal box a while ago but can’t find it anymore!
Any info would be much appreciated
Cheers
Thom
|
|
|
robertst
|
posted on 3/9/06 at 11:10 PM |
|
|
rallydesign has a section regarding the ratios to use... pretty useful imo. with that and the measurements from a standard sierra box, u should have
little problems doing a custom pedal box
go to rallydesign.co.uk then online shop and on the right, where it says "tech tips" there's a section called pedal
ratios/mechanical leverage.
Tom
|
|
timmy
|
posted on 4/9/06 at 01:52 AM |
|
|
Thom,
I designed my own floor mounted pedal box to suit Toyota brake and clutch m/c. I can email you the dwgs if you like.
PM me your email address and I'll send them over.
Cheers,
Tim
|
|
Danozeman
|
posted on 4/9/06 at 06:58 AM |
|
|
Have a look in my archive mate. Theres 3 piccies down the page labelled pedals. They may be of use. I didnt work out any ratios, i just made them
to see what they came out like. They look nice and as luck had it the ratios seem to be perfect. (makes a change i get some luck).
They are all seperate pedals/brackets bolt through the floor with a strengthening plate.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|