Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: LHS BEC.
Nitrogeno25

posted on 30/1/07 at 12:34 PM Reply With Quote
LHS BEC.

I plan to build a left hand side locost bike engined. All the pictures I can see are RHS. How much difficult would be with a bike engine to route the steering shaft to the left?

Thanks.

View User's Profile View All Posts By User U2U Member
stevec

posted on 30/1/07 at 12:45 PM Reply With Quote
There may be problems due to the engine needing to be over to the left to get the propshaft in reasonable line and also issues with the exhaust getting in the way, But I am sure its been done,
Steve.

View User's Profile View All Posts By User U2U Member
rav

posted on 30/1/07 at 12:58 PM Reply With Quote
So you mean having the column on the left (LHD), using a conventional inline 4 bike engine mounted the 'normal' way?

That would certainly present a few problems since the engine really has to sit accross to the left hand side in order to get the output sprocket facing down the tunnel rather than at the right hand side footwell!

The highest output big bike engines tend to have the carbs or throttle bodies mounted nearly vertically so they end up being pretty tall, roughly 600mm by the time you've added an air filter.

An engine from one of the bikes which are more "sports-tourers" might give you a bit more room to play with since they often have side-draught carbs. Or perhaps a V-twin??

I'd imagine there would be space for the column to pass along between the engine and the left hand side of the bonnet, but you'd possibly need a few UJ's to achieve it!

Someone on the continant must have built a LHD bike engined seven??

Good luck, I'm sure you can find a way!

View User's Profile E-Mail User View All Posts By User U2U Member
rav

posted on 30/1/07 at 01:19 PM Reply With Quote
Just been having a look through some links.

Looks fairly straightforward, this guys built a couple of LHD bike engined 7's, no idea what steering rack he used but it probably says on his website somehwhere...

http://www.seven-nl.tk/ Rescued attachment LHD bike engined.jpg
Rescued attachment LHD bike engined.jpg

View User's Profile E-Mail User View All Posts By User U2U Member
RallyHarry

posted on 30/1/07 at 10:59 PM Reply With Quote
or you could go with a shaftdriven bike engine ...
View User's Profile View All Posts By User U2U Member
R1 Seven

posted on 31/1/07 at 04:16 AM Reply With Quote
Hello,

US builder here, but not a frequent poster...

I am about to finish my R1 powered locost with Left hand steering. From what I understand the R1 has the output closer to the centerline than most bike engines, so it makes it a little easier. To help keep things reasonable on my car, I moved the engine a little further forward and to the right side to get the clearances that I needed and to keep the the prop angle reasonable.

The real problem area is the steering shaft. If you are willing to use more than two u-joints (I was not) then you can route the steering around the engine and not have to shift it to the right so far. There are plenty of pictures on my web page, specifically in the "Engine" and "Chassis" sections under "Construction".


[Edited on 1/31/07 by R1 Seven]





-Jeff
http://www.project-seven.goof.com/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
G.Man

posted on 31/1/07 at 05:09 AM Reply With Quote
Agriv8 has the steering routing you will need on his V8 powered MNR..

PM him for a pic, it will easily avoid a bike engine on LHD







Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!

View User's Profile View All Posts By User U2U Member
Chet

posted on 31/1/07 at 05:51 PM Reply With Quote
We use Busa engines in our LHD Fisher Furys. The engine was moved slightly forward compared to the RHD version. You can see some photos on our website. The weight of the engine can be offset by placing battery, etc to the opposite side.

Chet

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.