cmalc
|
| posted on 14/2/07 at 12:50 PM |
|
|
Distributor shaft
Hello
Help, I am stuck.
I am building an Indy. I have been advised by a main ford dealer to contact you guys about my probelm.
During my build I broke the plastic distributor shaft on the front of the engine with the hoist (grrr) anyway I contacted fords for the part but the
leadtime is months which means my car is stood idle...I need a distributor shaft for the 1.8cvh, can anyone advise where I can get one (already tried
the local scrappies and the onese on the interweb). Has anyone got one going spare?
Cheers
Malc
|
|
|
|
|
Bluemoon
|
| posted on 14/2/07 at 01:33 PM |
|
|
You should find one on hear as most don't fit the 1.8cvh motor (but I am!)...
How are you doing the engine mounts, any pics?
Dan
[Edited on 14/2/07 by Bluemoon]
|
|
|
cmalc
|
| posted on 14/2/07 at 02:37 PM |
|
|
I got them done. Modified the pinto ones from MK which cam with the kit. But... since then i have fitted a Westfield exhaust manifold which clashes
with the mount so now I am currently making one to fit, hopefully by the end of week work permitting.
Malc
|
|
|
greggors84
|
| posted on 14/2/07 at 03:03 PM |
|
|
Have you tried Burton? Link
They might have them in stock, if so they will get it out within a couple of days. Best to give them a call as their site might not list it in an
obvious place.
Chris
The Magnificent 7!
|
|
|
davidwag
|
| posted on 14/2/07 at 06:01 PM |
|
|
Distributor shaft?
Do you mean rotor arm? If so you can probably get one from a motor factor 
Davidwag
|
|
|
auzziejim
|
| posted on 14/2/07 at 06:02 PM |
|
|
give h+h ignition solutions a ring, very helpful and will sort you out better than ford ever could
james
|
|
|
DarrenW
|
| posted on 15/2/07 at 02:13 PM |
|
|
Sorry i dont have the part you need but try linking your request to the wanted section just in case someone else has one and doesnt always read the MK
section.
|
|
|
