Todays results from Northampton Motorsport rolling road mapping session.

A very healthy 225.7bhp and 175ft/lbs torque

Rev limiter now set to a dizzy 8000 rpm.

Max power reached at 7750.




[Edited on 14/3/11 by laptoprob]
[img]
Description [/img]


[Edited on 15/3/11 by laptoprob]
[img]
Description [/img]


[img]
Description [/img]

[Edited on 15/3/11 by laptoprob]

Good effort BUT i couldnt quite see the graph, can we have it a little bigger

Its for all those Mr.Magoos out there like you




[Edited on 14/3/11 by laptoprob]

have my eyes failed me, or does it not say what the engine / mods are?

still u seem pleased, so i congratulate you sir.

Wow now that's a wavy torque curve

Im guessing Vauxhall red top ? think the pic needs resizing to appreciate it , way too big

Yes Austin Man Redtop engine is correct.

QED 450 Cams
Solid Lifters
Double Race Springs
Gas flowed Head
Three angle Seats
Omega 12:1 Pistons
SBD Steel Rods
Weber Alpha TB`s+ECU

Images now resized

[Edited on 15/3/11 by laptoprob]

P.S.Thanks MrWibble

sounds nice. What sort of money does it cost to get that sort of BHP out of it?

Approaching 2 grand for the engine parts which include the Weber Alpha setup but some of the parts were bought second hand but were as new so saved a little along the way.

That said, this is only for the engine parts. I had to buy an uprated clutch(Helix Paddle) at around 300 quid, lightened steel billet flywheel at 180 quid, and a stronger box which is now TranX.