Board logo

Tiger Garages
MattStorey - 9/3/12 at 11:50 AM

Hi,

Anyone know of any garages in the north west/leeds/yorkshire/cheshire etc that would like to make some engine modifications on a tiger cat?

Chester Tiger talked themselves out of it when i rang them up.

Looking to pop a red-top or similar in but looking for a garage that is willing to support me. I just dont unfortunately have the time at the moment due to travelling for work and the pinto needs to come out this year.

Thanks, Matt


snakebelly - 9/3/12 at 12:07 PM

Not a Tiger garage exactly but Procomp in Birmingham are happy to work on most things?


HowardB - 9/3/12 at 01:09 PM

Or you could try Steve at Furysports cars, there is a good thread on here for a supercharged zetec that he is doing,...

Fury

Way down south, but very helpful,....

Hth


joemotion - 9/3/12 at 01:15 PM

Possibly Mac1 in Sheffield?


MattStorey - 9/3/12 at 01:17 PM

Hi,

I'm originally from the south coast so may well be of some use. I was hoping of a garage close so that i could go and stick my head in and annoy people when i am back from work.

M


swanny - 9/3/12 at 02:13 PM

MNR seem to have a good reputation for kit car work?


MattStorey - 9/3/12 at 02:18 PM

Yup, just had a missed call and VM from them. Will be giving them a call back in a min after i saw the work that they had done/helped with on the S2000 MNR.

It's a shame i dont have time to do things myself but work keeps me far to busy. Should of bought a boat...

M


swanny - 9/3/12 at 02:21 PM

i had a mate that they built a car for and he was very happy, after some poor experiences with others


laptoprob - 9/3/12 at 03:04 PM

quote:
Originally posted by joemotion
Possibly Mac1 in Sheffield?


+1. They installed or helped install my Redtop in my Avon.

Speak with Mark/Colin on 01142510116


MattStorey - 9/3/12 at 03:16 PM

Just called them. Going to visit. I can feel this getting expensive.

Ps. Rob - Still looking at putting the LET in...


laptoprob - 10/3/12 at 08:35 PM

quote:
Originally posted by MattStorey

Ps. Rob - Still looking at putting the LET in...


Hi Matt,

nows your time to ring MAC#1. They are in the throws of fitting a LET engine into a kit as we speak!!

Rgds,
Rob.