2L Zetec - need to rewire it. Just wondering what wiring looms everyone would reccommend? It needs to be done from scratch.

Cheers

Are you doing it yourself or wanting to pay someone to do it?

I would imagine any kit manufacturers loom would be a good place to start, all would have different colours which is really the key. By the time you have bought enough differnent colours to make a logical full loom you would be looking at a lot more than the cost of a premade one.
Raw do one for about £150 that would almost certainly suit any kitcar as nothing on a 7 is very manufacturer specific, dash, lights and engine are always roughly in the same place. Its pretty much just the wires and a few relays/fuse boxes etc so nothing that couldnt be adapted.


[Edited on 24-9-13 by loggyboy]

Cheers for the help, I'll check out Raw. I figured there must be somewhere that would have one that could be of use which would work out noticably cheaper than buying all the wires, fuse box etc and starting from scrath myself...

Thanks once again.

What about the odd idea of going direct to tiger racing themselves?


As they do an Avon specific loom


Avon loom link


Or an eBay special

uniloom

[Edited on 24/9/2013 by Hector.Brocklebank]

Dont forget tiger!

http://www.tigerracing.com/zencart/index.php?main_page=product_info&products_id=1178&zenid=ic1c4vginqusqirev741cotcb4


EDIT
LOL beaten to it!

[Edited on 24-9-13 by loggyboy]

Using a loom from http://www.premierwiring.co.uk/ on our GTA, they were very helpful and come with full instructions
HTH

Thanks all!