Update on Tigar Avon Progress, photo bucket links as I can't manage to upload pics onto here

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/E1A07B8B-EAB7-40C4-ABAF-5838DE33D608_zpskrv4kjcq.jpg Chassis so far

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/B4C3551B-27CB-4E83-A309-6867AF56BDA7_zpsbczvwgog.jpg Rear wishbone brackets

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/AF82DDAD-A1D5-4061-891F-D89900786944_zpsbmgyxk33.jpg Front wishbone brackets

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/4064FA6B-3DDF-4A76-9D7E-3F1C67E4625A_zpsaucy71zq.jpg Front upper wishbone, wide track with camber adjuster

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/1541F3FB-8C83-47F4-A1FC-077867971C1F_zps9gmglvpu.jpg Rear upper wishbones



Hope these are visible also posted in chassis section

Well I've been quietly working away on the Avon for a few weeks now, today I trial fitted the bodywork onto my chassis before I fully weld everything, to be honest I couldn't believe how well it fitted!
Thought I would have a nightmare, the only thing I'm not too happy about is the fitting of the bonnet, but I think I've read other posts with people having the same problem

Chaseis can now be fully welded this week and then off to powder coaters

Anyway here are a few more pics, sorry I can't seem to get anything uploaded onto here

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/264ABA55-8671-4457-8092-D14C1762A420_zpsb36ytnvg.jpg

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/1DEFD0FF-2357-4600-8B13-7BBF3E0A3366_zps2lvyzvoi.jpg

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/AC85DD4A-FB94-4D88-8823-EFE9B9B2A1B7_zpsshd1lfng.jpg

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/29EF7A71-C63B-42DD-89A0-2BC5504214D3_zpssu8jn8y8.jpg

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/9333B9BE-1241-40EE-B703-BC831EB1C256_zpsexht49as.jpg

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/3305BE82-BEE9-4195-8B3B-06DBBBD26172_zps88pi4ydl.jpg

http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/EA9ECE1B-805D-4A43-86CE-A95C58AA8653_zpsl4px60fb.jpg

Looking good!

Did the bonnet come like that or have you cut it? as I had to cut mine.

It came like that, what did you have to cut off?

Back and front as it was way toooo long

The nose cone may is not fitted yet so not sure if it is in correct place yet

I've added a blog link to my signature and uploading pictures of the build on there, the chassis is now finished, starting to clean up donor parts now prior to fitting

Floor and rear bulkhead fabricated and fitted today, update with pics on my Facebook blog which is now correct link!

[Edited on 9/1/16 by locost7-online.com]

Made a bit more progress today, fitted the rebuilt diff, rear wishbones, routed the brake pipes ready to be terminated and clipped in, and tried a driveshaft which seemed to look correct
Pics on my blog

Bit more slow progress over Easter, got the engine in so I can position everything around it but it will be coming out again, the exhaust only has about 15 mm clearance from the top chassis rail

Pics on my Facebook blog below

Got a bit.more done this weekend, reconditioned the uprights and brakes and trial fitted the bodywork,
Pics on my fb blog