Just finished off my front wishbones, 45mm wider each side, do I go with the standard tiger coil over and move the bottom coil over bracket inboard to match the original dimension of the wishbone or do I move the bottom bracket out to suit the 45 mm wider and use a different coil over length?

I used the old shockers and uprated to 400lbs springs. Car spent most of its days on track and handled great.

Thanks laptop, I just wanted confirmation I will be doing the same

Another question about coil overs, are the tiger ones fitted with rose joints? The brackets seem to be a bit skew with each other top to bottom on chassis and lower wishbone, the bracket is dead centre of the lower wishbone

quote:

---

Originally posted by locost7-online.com
Another question about coil overs, are the tiger ones fitted with rose joints? The brackets seem to be a bit skew with each other top to bottom on chassis and lower wishbone, the bracket is dead centre of the lower wishbone

---

Just a quick one about the shock mounting points... when I put the shock in the mounts, there is a definate twist I have to put onto the rubber mounts in order to get the bolts through top and bottom. Is this due to the misalignment you're talking about above?

Cheers,

Chris.