Setting up my front toe in. Supposed to be 4 mm according to the book (2mm each side). Trouble is I can get it to 2mm (1 mm each side), but if I turn one of the track rod ends through another 360 degree it goes to 9.5mm. Guess I leave as is or is there something else I need to do?

Toe in/out is infinitely variable, just turn the rod that goes into the steering rack, don't turn the track rod end itself, leave it connected to the hub assembly.

[Edited on 4/8/06 by JohnN]

Doh! yea see what you mean. I thought the sterring rack shafts were fixed, but do now recal them twisting as I tightened the locking bolts. Will have another go today. Thanks for that