Board logo

another clearout
andy o - 25/3/08 at 06:58 PM

for sale
micron carbon can&clamp(new)£80
new walbro gsl pump £35
new tiger super six s/s silencer £50
rad(580x330)and spal 12" fan(all new)£60
bailey morris prop(bike to sierra)2 piece with centre bearing and slide 1500mm £200(never been fitted)
tiger fuel guage £10
1m of 28mmi/d silicon hose(new) £15
zetec 1.8 flywheel and clutch(little used)£20
new fiction plate for above (ap sprint,cost £50 from burton) £30
new bosch alternator for zetec £20
all above can be posted at cost or collected
u2u or ring07825949757
thanks andy


ch1ll1 - 25/3/08 at 07:03 PM

first dibs at prop!

will go and measure it in about an hour !


Werner Van Loock - 25/3/08 at 07:29 PM

quote:
Originally posted by robocog
Interested in the clutch and plate (if its Zetec to type 9)

new bosch alternator for zetec £20 ????
Whats that about then?
All the Zetecs I've seen are wasted spark

Intrigued...
Rob


Alternator, not distributor


andy o - 25/3/08 at 07:30 PM

yes the the ap plate was bought to fit a type 9 but due to a change of plan(r1)it has not been used
alternator as in battery charging
andy


stuart_g - 25/3/08 at 07:34 PM

U2U ref Spal fan. does it suck or blow?oooherr

[Edited on 25/3/08 by stuart_g]


andy o - 25/3/08 at 07:45 PM

it sucks!


greglogan - 25/3/08 at 07:45 PM

Interested re pump. Do you have pics and spec?

Greg.


andy o - 25/3/08 at 07:49 PM

hi cant post pictures for some reason(lack of it skill)but a search on google for walbro gsl390 should provide spec etc
andy


caber - 25/3/08 at 07:56 PM

Second dibs for the injection pump please!

Caber


stuart_g - 25/3/08 at 08:01 PM

quote:
Originally posted by andy o
it sucks!


Suckers fit behind the rad don't they? I need it to fit in front of the rad.


andy o - 25/3/08 at 08:03 PM

yes this sucker goes behind


welderman - 25/3/08 at 08:14 PM

second dibs on prop, depends on size


Dingz - 25/3/08 at 09:56 PM

Is the silencer a repackable one?
Thanks


jimbona2 - 26/3/08 at 09:14 AM

u2u sent re tiger dial