Long shot I know but I'm after 1600 xflow block, my cylinders have gone all oval :-(
Please let me know what you've got getting desperate
Thanks graham

Can't if be overbored to a) increase size to 1700ish cc and b) make them round again.

ATB

Simon

Unfortunately it has already been overbored to 1700

[Edited on 11/5/12 by greed1]

So why not fit liners.

Just seen a couple of x flows on e-bay
Search under locost kit car

Ok thank you watching a couple now

I have one. You are welcome to it if you can collect.

David

I have a 711 1600 block with standard size bores. Just come out of my car running fine. I only changed as i gota 1700 ax block cheap. Make me an offer if your interested .

Matt

hi have a stripped 1600 engine open to offers before i ebay it

Thanks to all the replys, DavidM was kind enough to let me pick the engine up at the weekend and give me my first go in a kit
So hopefully I won't need another block
Thanks again
Graham

Ps forgot to ask you David what mpg can you get out the xflow

Hi Graham,
I hope you can make use of the engine and I'm pleased you enjoyed the ride out in my car. You should come again if you need some motivation to finish yours. I've found my glasses now so I'll be able to see where I'm going.

The crossflow is not very economical by today's standards. With the twin 40s I get about 25mpg on a run if I take it easy. It probably drops to 20mpg or less if I rag it. It's a good job petrol isn't expensive to buy. It uses more oil than petrol.

David