locost7-online.com
|
| posted on 21/6/15 at 09:09 PM |
|
|
Tiger Avon so far....
Update on Tigar Avon Progress, photo bucket links as I can't manage to upload pics onto here
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/E1A07B8B-EAB7-40C4-ABAF-5838DE33D608_zpskrv4kjcq.jpg Chassis so far
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/B4C3551B-27CB-4E83-A309-6867AF56BDA7_zpsbczvwgog.jpg Rear wishbone
brackets
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/AF82DDAD-A1D5-4061-891F-D89900786944_zpsbmgyxk33.jpg Front wishbone
brackets
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/4064FA6B-3DDF-4A76-9D7E-3F1C67E4625A_zpsaucy71zq.jpg Front upper
wishbone, wide track with camber adjuster
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/1541F3FB-8C83-47F4-A1FC-077867971C1F_zps9gmglvpu.jpg Rear upper
wishbones
Hope these are visible also posted in chassis section
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
|
|
locost7-online.com
|
| posted on 13/9/15 at 06:39 PM |
|
|
Well I've been quietly working away on the Avon for a few weeks now, today I trial fitted the bodywork onto my chassis before I fully weld
everything, to be honest I couldn't believe how well it fitted!
Thought I would have a nightmare, the only thing I'm not too happy about is the fitting of the bonnet, but I think I've read other posts
with people having the same problem
Chaseis can now be fully welded this week and then off to powder coaters
Anyway here are a few more pics, sorry I can't seem to get anything uploaded onto here
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/264ABA55-8671-4457-8092-D14C1762A420_zpsb36ytnvg.jpg
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/1DEFD0FF-2357-4600-8B13-7BBF3E0A3366_zps2lvyzvoi.jpg
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/AC85DD4A-FB94-4D88-8823-EFE9B9B2A1B7_zpsshd1lfng.jpg
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/29EF7A71-C63B-42DD-89A0-2BC5504214D3_zpssu8jn8y8.jpg
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/9333B9BE-1241-40EE-B703-BC831EB1C256_zpsexht49as.jpg
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/3305BE82-BEE9-4195-8B3B-06DBBBD26172_zps88pi4ydl.jpg
http://i1274.photobucket.com/albums/y440/johnhiggs/Mobile%20Uploads/tiger%20Avon/EA9ECE1B-805D-4A43-86CE-A95C58AA8653_zpsl4px60fb.jpg
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
neilp1
|
| posted on 14/9/15 at 08:27 AM |
|
|
Looking good!
Did the bonnet come like that or have you cut it? as I had to cut mine.
|
|
|
locost7-online.com
|
| posted on 14/9/15 at 08:29 AM |
|
|
It came like that, what did you have to cut off?
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
neilp1
|
| posted on 14/9/15 at 08:33 AM |
|
|
Back and front as it was way toooo long
|
|
|
locost7-online.com
|
| posted on 14/9/15 at 09:26 AM |
|
|
The nose cone may is not fitted yet so not sure if it is in correct place yet
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
locost7-online.com
|
| posted on 28/12/15 at 07:43 PM |
|
|
I've added a blog link to my signature and uploading pictures of the build on there, the chassis is now finished, starting to clean up donor
parts now prior to fitting
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
locost7-online.com
|
| posted on 9/1/16 at 04:05 PM |
|
|
Floor and rear bulkhead fabricated and fitted today, update with pics on my Facebook blog which is now correct link!
[Edited on 9/1/16 by locost7-online.com]
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
locost7-online.com
|
| posted on 28/2/16 at 12:48 PM |
|
|
Made a bit more progress today, fitted the rebuilt diff, rear wishbones, routed the brake pipes ready to be terminated and clipped in, and tried a
driveshaft which seemed to look correct
Pics on my blog
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
locost7-online.com
|
| posted on 27/3/16 at 03:03 PM |
|
|
Bit more slow progress over Easter, got the engine in so I can position everything around it but it will be coming out again, the exhaust only has
about 15 mm clearance from the top chassis rail
Pics on my Facebook blog below
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
locost7-online.com
|
| posted on 19/6/16 at 09:09 PM |
|
|
Got a bit.more done this weekend, reconditioned the uprights and brakes and trial fitted the bodywork,
Pics on my fb blog
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
