L1berator
|
| posted on 24/7/18 at 02:04 AM |
|
|
Tiger Avon Boot Dimensions
Morning, All,
I wonder if someone could be so kind as to provide the measurements for the Tiger Avon boot lid and boot. What I'm looking for is the width and
length of the boot lid, then the depth of the boot and also the measurement from front to back and side to side across the bottom of the boot. I know
the front and back (and the sides) of the boot slope inwards so that the base of the boot is smaller than the boot lid.
I've sent the bodywork away for paint so can't take the measurements from my own tub, but would like to fire up Autocad to design some
swan neck hinges ready for when it gets back.
Thanks,
Peter
|
|
|
|
|
RedAvon
|
 posted on 26/7/18 at 08:25 AM |
|
|
Hi Peter,
Boot lid (measured from new unused) 71cm x 26.5cm.
Bottom is 68.5 cm. However my car is part built and the previous owner cut out most of the bottom of the boot but I have measured the part that is
left . I imagine the other dimension would have the same taper and 24cm would be about right.
Hope this helps.
Cheers
Ian
Bricoleur
|
|
|
L1berator
|
| posted on 26/7/18 at 04:13 PM |
|
|
Hi Ian,
Thanks very much for the measurements.
Regards,
Peter
|
|
|
RedAvon
|
| posted on 27/7/18 at 08:05 AM |
|
|
Hi again Peter,
I realise i forgot the depth of the boot measurement you asked for. This is 16.5cm.
Cheers
Ian
Bricoleur
|
|
|
L1berator
|
| posted on 28/7/18 at 03:19 AM |
|
|
Thanks Again, Ian - much appreciated...
Regards,
Peter
|
|
|
