edspurrier
|
| posted on 15/5/07 at 08:19 PM |
|
|
Throttle pedal
Slightly suprised to find that the Tiger throttle pedal, when put on the bolt welded to the chassis, fouls the side of the chassis. So we thought
we'd cut the pedal end off and have it re-welded on the other side.
Has anybody else found the same problem or a better solution?
Thanks
|
|
|
|
|
graememk
|
| posted on 15/5/07 at 09:32 PM |
|
|
if you cut the peddle of and put it on the other side does that mean you can only drive the car if you have a passenger ?
|
|
|
Rudy
|
| posted on 16/5/07 at 06:26 AM |
|
|
I did not use tiger throttle pedal, however I am not surprised it do not fit!
There is lot of things that do not fit....
Sorry about my English
|
|
|
DaveFJ
|
| posted on 16/5/07 at 07:40 AM |
|
|
I have 'cut and shut' the original sierra throttle pedal and it fits fine...
I have heard that the tiger pedal is too flimsy and likely to bend unless you weld on a triangular fillet along it's length. I think personally
i would make one rather than go with tiger's design...
Dave
"In Support of Help the Heroes" - Always
|
|
|
Fishface
|
| posted on 17/5/07 at 12:14 PM |
|
|
i brought the tiger pedal and found it useless. In the end i too cut the standard sierra pedals down and have to say im very happy with them
|
|
|
ayoungman
|
| posted on 17/5/07 at 11:11 PM |
|
|
i made my own and it fits nicely.
"just like that !"
|
|
|
timwest167
|
| posted on 18/5/07 at 09:46 AM |
|
|
I made my own as well - hand crafted to perfectly fit me!
|
|
|
edspurrier
|
| posted on 20/5/07 at 12:51 PM |
|
|
Thanks all - Sierra pedal on the way
|
|
|
