Rudy
|
| posted on 8/9/07 at 06:56 AM |
|
|
Front bottom ball joint, nuts
Hi friends,
this morning I regulated front lights, and I saw bottom ball joint nut, it was unscrewded  , I am sure I fixed it in the beginning, I only
did about 1000 km with my car. So please, friends, have a look at your bottom ball joint.
Sorry about my English
|
|
|
|
|
NeilP
|
| posted on 8/9/07 at 09:51 AM |
|
|
It is surprising, despite locktight and setting the torque wrench to FT that these little buggers still manage to find their way loose - My propshaft
bolt were only finger tight the other day...
I think that a regular 30min every month is probably a (balls-aching) but sensible habit to get into....
If you pay peanuts...
Mentale, yar? Yar, mentale!
Drive it like you stole it!
|
|
|
fideel109
|
| posted on 8/9/07 at 01:41 PM |
|
|
Thanks for the warning!!!!
I'm going over my car tomorrow after my ride from last week.
I've done some really bad roads and I've only 200 miles on the counter.
I'm curious.....
Ciao-JP
|
|
|
BenB
|
| posted on 8/9/07 at 02:14 PM |
|
|
Yes! Do check them (and preferably paint a line on the nut and thread so you can see if they've slipped).
Having had one pop off @ 40mph (with the obvious consequences) I wouldn't recommend it except to the very constipated. 
|
|
|
Peteff
|
| posted on 8/9/07 at 04:11 PM |
|
|
Mine went years ago, but it stripped the thread off the balljoint, it didn't come loose. It was probably over enthusiasm on my part with the
ratchet so don't overdo it either.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Rudy
|
| posted on 8/9/07 at 06:48 PM |
|
|
quote:
Originally posted by BenB
Yes! Do check them (and preferably paint a line on the nut and thread so you can see if they've slipped).
Having had one pop off @ 40mph (with the obvious consequences) I wouldn't recommend it except to the very constipated.
I am sorry, and was happened? was you fine?
Sorry about my English
|
|
|
