Numb nuts
|
| posted on 26/4/09 at 08:13 PM |
|
|
Tyre pressures
Hi all.
In relation to Davey D's 'Self Centering' topic, there was a lot of talk about tyre pressures.
What are the recommended tyre pressures for a locost 7 type?
I am running mine at 16psi all round.
 Steve
|
|
|
|
|
rusty nuts
|
| posted on 26/4/09 at 08:19 PM |
|
|
Running 18psi all round on mine
|
|
|
marshall
|
| posted on 26/4/09 at 08:19 PM |
|
|
18 psi will be ok if the tyre is a 195 size
|
|
|
omega0684
|
| posted on 26/4/09 at 08:22 PM |
|
|
i run 15 all round but think this is a bit low so im going to put mine up to 18-20 psi
|
|
|
Numb nuts
|
| posted on 26/4/09 at 08:25 PM |
|
|
They are 195/50-15's
|
|
|
stuart_g
|
| posted on 26/4/09 at 08:34 PM |
|
|
18psi works for me.
|
|
|
clairetoo
|
| posted on 26/4/09 at 08:34 PM |
|
|
I run 18 psi all round (195/50 15's on a 685 kg Fury)
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
iain b
|
| posted on 26/4/09 at 08:36 PM |
|
|
mnr vortx on 195 /205 rear 161b runs great
|
|
|
Ninehigh
|
| posted on 26/4/09 at 10:36 PM |
|
|
Just as a thought is there any kind of formula to work it out? Sometimes my tintop tyres look low but then when I check them they're exactly at
the pressure the book says
|
|
|
clairetoo
|
| posted on 27/4/09 at 06:01 AM |
|
|
quote:
Originally posted by Ninehigh
Sometimes my tintop tyres look low but then when I check them they're exactly at the pressure the book says
Where is the valve when you check them ? They will only be low at the bottom , so you may need to rotate them to get a better reading  
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
Richard Quinn
|
| posted on 27/4/09 at 06:15 AM |
|
|
I always thought that they were higher at the bottom because that's the bit being squashed so there's more pressure.
|
|
|
Ninehigh
|
| posted on 3/5/09 at 05:04 PM |
|
|
I make sure it's in the middle so I get an average
|
|
|
.jpg)
