Schrodinger
|
| posted on 8/9/09 at 08:00 PM |
|
|
Windscreen surround
I am at the design/thinking it through stage on my next project and want to build a car with a full screen but nut the flat se7en type screen.
I am thinking of using a standard screen something like a Seat Leon, how would you make the screen surround?
My thoughts are to either take a mould from the original car and work from there or from a screen.
Any other thoughts?
Keith
Aviemore
|
|
|
|
|
Trev Borg
|
| posted on 8/9/09 at 08:29 PM |
|
|
How about mgf, it is made fron high tensile steel, offer some protection, and comes complete with surround, and plastic inner bits
Before you judge a man, walk a mile in his shoes.
By that time, who cares.
You're a mile away, and you've got his shoes
|
|
|
Schrodinger
|
| posted on 8/9/09 at 08:48 PM |
|
|
quote:
Originally posted by Trev Borg
How about mgf, it is made fron high tensile steel, offer some protection, and comes complete with surround, and plastic inner bits
Does the MGF surround unbolt from the chassis like the MGB?
Keith
Aviemore
|
|
|
Trev Borg
|
| posted on 9/9/09 at 07:17 AM |
|
|
It doesn't bolt to unfortunately, its integral.
But there are load of shells out there, so it would just be a case of cutting one off, and fabricating a bracket of each side.
I may be cutting the one off mine as i prefer the aeroscreen look.
not sure if this would be any easier that using one from another car.
How about other lttle 2 seaters? mx5 or alike.
What width do you need?
[Edited on 9/9/2009 by Trev Borg]
Before you judge a man, walk a mile in his shoes.
By that time, who cares.
You're a mile away, and you've got his shoes
|
|
|
Schrodinger
|
| posted on 11/9/09 at 09:34 AM |
|
|
ATM I am only at the stage of thinking "How To".
Your idea of cutting the screen surround off another 2 seater is one way. I was thinking of making the surround part of the bodyshell as I am not
looking at a se7en style body/wings.
I don't therefore have any thoughts as to dimensions yet.
Keith
Aviemore
|
|
|
Regsmonster
|
| posted on 11/9/09 at 01:05 PM |
|
|
Why not use an Elise screen? The surround is integral to the glass.
|
|
|
Schrodinger
|
| posted on 13/9/09 at 08:00 PM |
|
|
quote:
Originally posted by Regsmonster
Why not use an Elise screen? The surround is integral to the glass.
I don't think that the pilars and the headrail are part of the screen.
What I am thinking of doing is to make my own body for the car, think Fury/Stylus with a full screen. The screen is bonded to the bodywork, my
question was (and it may have been ambiguous) how would anybody suggest making the mould for this part of the bodywork, moulding from the original
bodywork or from the screen.
Keith
Aviemore
|
|
|
