R1 Haynes Manual

Not logged in [Login - Register]

LocostBuilders » Forum » BEC » R1 Haynes Manual

Garage Equipment at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

spdpug98

Contributor

Posts 743
Registered 8/2/08
Location Hampshire
Member Is Offline

Building: MNR Vortx + (Passed SVA June 09)

posted on 7/8/13 at 08:35 PM

R1 Haynes Manual

Does anyone have an electronic copy of a 2003 R1 manual that they'd be happy to email me a copy of, I need to get the bearings out and have been told I don't need to split the block to get them out but I can't see any other way

[Edited on 7/8/13 by spdpug98]

My Blog: http://spdpug98.wordpress.com/

Wheels244

Contributor

Posts 1373
Registered 18/6/07
Location Bedale, North Yorkshire
Member Is Offline

Photo Archive Go!

Building: Built MNR Vortx R1. Finishing 220BHP RedTop Locos

posted on 7/8/13 at 08:57 PM

Hi Dave

Sorry to hear you're having engine bother.

I've got a manual on disc somewhere - do want me to dig it out, copy and post it to you ?
I think I've still got your address.

spdpug98

Contributor

Posts 743
Registered 8/2/08
Location Hampshire
Member Is Offline

Building: MNR Vortx + (Passed SVA June 09)

posted on 7/8/13 at 09:02 PM

quote:
Originally posted by Wheels244
Hi Dave

Sorry to hear you're having engine bother.

I've got a manual on disc somewhere - do want me to dig it out, copy and post it to you ?
I think I've still got your address.

Hi Rob

That would be brilliant if you don't mind, how are you doing....

I stripped the pump this evening and found some metal fragments in the oil side of the pump, only thing I can find that's in bits is the clutch plate, can't believe I shattered a clutch plate :-)

ETA- happy to pay all associated costs mate

[Edited on 7/8/13 by spdpug98]

My Blog: http://spdpug98.wordpress.com/

Wheels244

Contributor

Posts 1373
Registered 18/6/07
Location Bedale, North Yorkshire
Member Is Offline

Photo Archive Go!

Building: Built MNR Vortx R1. Finishing 220BHP RedTop Locos

posted on 7/8/13 at 09:17 PM

Things good this end mate.

Have you been enjoying your engine a little too much

Are you on the same email address - I could try emailing it - don't know if it'll be too big, but worth a try.

If I do have to send it on disc - don't be daft, there won't be any charge - I aren't you know who

spdpug98

Contributor

Posts 743
Registered 8/2/08
Location Hampshire
Member Is Offline

Building: MNR Vortx + (Passed SVA June 09)

posted on 7/8/13 at 09:27 PM

quote:
Originally posted by Wheels244
Things good this end mate.

Have you been enjoying your engine a little too much

Are you on the same email address - I could try emailing it - don't know if it'll be too big, but worth a try.

If I do have to send it on disc - don't be daft, there won't be any charge - I aren't you know who

Cheers mate,

!!!! I know who you mean

Same email address......

My Blog: http://spdpug98.wordpress.com/

Wheels244

Contributor

Posts 1373
Registered 18/6/07
Location Bedale, North Yorkshire
Member Is Offline

Photo Archive Go!

Building: Built MNR Vortx R1. Finishing 220BHP RedTop Locos

posted on 7/8/13 at 09:34 PM

I've just sent you what I thought was the full engine manual, but it wasn't, just the normal bike handbook - sorry mate, bear with me while I try to find the proper one.

markyb

Contributor

Posts 250
Registered 9/5/04
Location Northern Ireland
Member Is Offline

Photo Archive Go!

Building: MNR Vortx

posted on 7/8/13 at 10:58 PM

I have the PDF with the crankcase section if wheels244 isnt able to find it - just drop me a U2U and will sort something out

renetom

Contributor

Posts 649
Registered 9/7/10
Location Gatwick Sussex
Member Is Offline

Photo Archive Go!

Building: Built Mk with R1 engine

posted on 8/8/13 at 06:41 AM

hi
I have a 2004 Yamaha full service manual
send me your email & I'll send it to you
in pdf format , not haynes,
the only other one I have is the same but for 98 R1
good luck
René

Digimon

Contributor

Posts 276
Registered 12/5/13
Location South East Kent
Member Is Offline

Photo Archive Go!

Building: MNR Vortx

posted on 8/8/13 at 07:19 AM

This guy has done a great 24 part video series on how to rebuild on the early R1 engine, now to sure how much they changed the later engine but it might help

renetom

Contributor

Posts 649
Registered 9/7/10
Location Gatwick Sussex
Member Is Offline

Photo Archive Go!

Building: Built Mk with R1 engine

posted on 8/8/13 at 07:54 AM

hi
the email you sent me does not work ?

spdpug98

Contributor

Posts 743
Registered 8/2/08
Location Hampshire
Member Is Offline

Building: MNR Vortx + (Passed SVA June 09)

posted on 8/8/13 at 08:09 AM

quote:
Originally posted by Digimon
This guy has done a great 24 part video series on how to rebuild on the early R1 engine, now to sure how much they changed the later engine but it might help

Thanks I'll have a look at that later

My Blog: http://spdpug98.wordpress.com/

Wheels244

Contributor

Posts 1373
Registered 18/6/07
Location Bedale, North Yorkshire
Member Is Offline

Photo Archive Go!

Building: Built MNR Vortx R1. Finishing 220BHP RedTop Locos

posted on 8/8/13 at 05:32 PM

Hi Dave

Sent you an email - sorry, my disc is for a '98 model - not a 5PW

Rob

spdpug98

Contributor

Posts 743
Registered 8/2/08
Location Hampshire
Member Is Offline

Building: MNR Vortx + (Passed SVA June 09)

posted on 8/8/13 at 06:18 PM

quote:
Originally posted by Wheels244
Hi Dave

Sent you an email - sorry, my disc is for a '98 model - not a 5PW

Rob

Rob

Just picked it up, thanks for looking mate - I've managed to get a copy of the workshop manual

Cheers

Dave

My Blog: http://spdpug98.wordpress.com/

LocostBuilders » Forum » BEC » R1 Haynes Manual

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.