Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: LED Headlight Wiring for Common Positive Loom
Barkalarr
Contributor






Posts 942
Registered 14/3/12
Location Essex
Member Is Offline

Photo Archive Go!
Building: Caterham R300, Caterham Roadsport,Indy R1,Indy Zet

posted on 28/10/20 at 08:02 PM Reply With Quote
LED Headlight Wiring for Common Positive Loom

I'm using the standard Miata / MX-5 wiring and I'm trying to fit Halo led daymaker headlights.

Off the bat, it doesn't work. Upon digging a little deeper, I've found the MX-5 wiring diagram shows the headlights as a common positive and switched earth for the low beam and a switched earth for the high beam.

Question : how can I convert the switched earth into something the daymaker is going to work with?

I do have an idea using 2 relays, but that's a bit Heath Robinson and i don't really want to do that.
Anyone else got a better idea?

Miata Wiring Diagram

Halo DRL Wiring Diagram

[Edited on 28/10/20 by Barkalarr]

View User's Profile View All Posts By User U2U Member
SteveWalker

posted on 28/10/20 at 10:17 PM Reply With Quote
Something doesn't match up there. The Halo diagram shows the centre pin on the H4 connector being the common, but the relay diagram shows one of the side pins being common. The latter appears to be correct.
View User's Profile View All Posts By User U2U Member
Mr Whippy

posted on 28/10/20 at 10:22 PM Reply With Quote
Personally I'd be perfectly happy using two relays as headlights are usually operated using them and many use two relays... they are usually extremely reliable so long as the current is within their rating and good thing about using two is if one fails you still have lights
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
gremlin1234

posted on 29/10/20 at 11:42 AM Reply With Quote
quote:
Originally posted by SteveWalker
Something doesn't match up there. The Halo diagram shows the centre pin on the H4 connector being the common, but the relay diagram shows one of the side pins being common. The latter appears to be correct.

I agree, the pic with relays is h4
the other pic seems to be for the old sealed beam standard h4656, not h4

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.