grumpy griff
|
| posted on 11/12/06 at 08:00 PM |
|
|
Photo needed
Just bought a tiger avon bike engined race car which I'm coverting to zetec race spec. Need to alter the chassis, some of the rails need
removing and some need adding. Question is which ones . I've looked at the tiger book and have a reasonable idea. Can some one answer this
question:
Is the zetec avon chassis different to a pinto chassis?
To assist could some one send me a photo looking down on the engine bay (minus engine) of an avon zetec chassis. Send to griffiths.steve@virgin.net
Thanks Steve
|
|
|
|
|
dave-69isit
|
| posted on 11/12/06 at 10:34 PM |
|
|
avon
pinto and zetec should be same chassie
|
|
|
soggy 3
|
| posted on 12/12/06 at 01:03 AM |
|
|
They are the same as far as i know try here www.tigersportscars.nl 
click on autos then avon then the middle of the three choices,there are some realy good pics of the chassis before they fit the zetec
[Edited on 12/12/06 by soggy 3]
|
|
|
viatron
|
| posted on 12/12/06 at 08:57 AM |
|
|
try www.tigerownersclub.co.uk and check out the gallery, i think there are some bair chassis shots in my album, mac mccarthy
Can confirm that Tiger only do one Avon chassis so it will be the same for both Zetec and Pinto, only difference will be the engine mounts.
HTH
Mac
|
|
|
Rudy
|
| posted on 12/12/06 at 08:10 PM |
|
|
it is the same chassis. There is 3 engine mounting plates: on the right is the same, on the left, one is for pinto and the other is for zetec.
Sorry about my English
|
|
|
ayoungman
|
| posted on 14/12/06 at 11:34 AM |
|
|
probably some pics in mine too. HTH
"just like that !"
|
|
|
soggy 3
|
| posted on 15/12/06 at 07:33 AM |
|
|
How about here.
http://www.avon-kitcar.co.uk/
[Edited on 15/12/06 by soggy 3]
[Edited on 15/12/06 by soggy 3]
|
|
|
