supercat
|
| posted on 1/4/07 at 06:41 PM |
|
|
OBP/ST Floor Mounted Pedal Box
Hello,
Has anyone fitted floor mounted pedals in their Avon? Any pictures how it was done?
Cheers, James
|
|
|
|
|
Avoneer
|
| posted on 1/4/07 at 06:52 PM |
|
|
Carl Gledard did.
Can't remember who's he used, but it was like the generic one that ST and others sell.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
carlgeldard
|
| posted on 1/4/07 at 07:15 PM |
|
|
Yes I did and I got an extra 2 inch leg room. I got them from luego. Car Builder Solutions sell the same ones.
|
|
|
Paul TigerB6
|
| posted on 1/4/07 at 07:31 PM |
|
|
quote:
Originally posted by supercat
Hello,
Has anyone fitted floor mounted pedals in their Avon? Any pictures how it was done?
Cheers, James
Not into an Avon but fitting one in my Tiger B6. I am just in the process of fitting them and think there's a few pics in my archive. If you
want any more pics / measurements then drop me a U2U with your email address. I am fitting a floor mounted throttle pedal from MK instead of the
pendulum ST one that I got with the floor mounted ST brake / clutch pedals.
Cheers
Paul
|
|
|
andrew.carwithen
|
| posted on 1/4/07 at 08:02 PM |
|
|
There's a pic in my archive showing twin Master cylinders fitted and if you looked in 'Lightning's photo archive I'm sure
there's pics showing the pedal box itself fitted in footwell.
Andy.
|
|
|
supercat
|
| posted on 2/4/07 at 09:15 AM |
|
|
I already have the pedal box, just scratching my head how to make it fit. The plate tiger weld in is too high, and also the box doesnt fit between the
chassis uprights.
The clutch will be cable operated. At the moment my plan is to cut out the floor plate and chop the pedal box to make it fit, just wondered if anyone
had a different method....
Cheers, James
|
|
|
shades
|
| posted on 2/4/07 at 05:13 PM |
|
|
I have fitted the same ones in my avon.
Two things from memory were I chopped the edge of the pedal back plate to make it fit over the box section. And the other thing is that you need to
position such that the clutch cable has a clear path through the same box section when you drill a big hole through it. I then just bolted it to the
floor plate...
Thanks
Adrian
|
|
|
studon
|
| posted on 2/4/07 at 05:32 PM |
|
|
Tiger supply floor mounted pedal sets.
They have also fitted them in their previous Avon domonstrator.
They definately have a better feel and give that all needed extra leg room.
Its worth giving Tiger a call
|
|
|
%20(WinCE).JPG)
