Cubby
|
| posted on 27/11/07 at 02:09 PM |
|
|
Zetec Thermostat housing
Hi everyone ,
Off the top of your heads does anyone know the thread size on the thermostat housing on a 2.0L zetec blacktop for the temp sensor . Not the lower one
, the top one ?
thanks and enjoy your day !
|
|
|
|
|
the_fbi
|
| posted on 27/11/07 at 07:38 PM |
|
|
Thats the cooling fan switch one in case it helps.
Sorry thats all I know.
|
|
|
Schrodinger
|
| posted on 28/11/07 at 04:16 PM |
|
|
I thought the blacktop had a plastic thermostat housing with "clip in" sensors.
One is for the ECU and the other for the Temp guage. Niether on the themostat housing are for the rad fan.
[Edited on 28/11/07 by Schrodinger]
Keith
Aviemore
|
|
|
the_fbi
|
| posted on 28/11/07 at 05:39 PM |
|
|
quote:
Originally posted by Schrodinger
I thought the blacktop had a plastic thermostat housing with "clip in" sensors.
One is for the ECU and the other for the Temp guage. Niether on the themostat housing are for the rad fan.
[Edited on 28/11/07 by Schrodinger]
On the mondeo (bakelite) housing the top one is rad fan.
The focus thermostat housing (plastic one) doesn't have a top sensor and has a CHT for coolant temp, so I believe he must have a mondeo
housing.
That said, given that people tend to swap these things around all over the place (I run a mondeo stat housing on my Focus for a proper CTS as I had
plans for Megasquirt/Omex) what he has could be any number of things.
There are at least 3 different versions of that housing.
|
|
|
