jamrogers
|
| posted on 24/6/08 at 03:04 PM |
|
|
which starter motor
Hi guys i'm getting conflicting opinions on which starter motor to use when fitting a type 9 gerabox to a 2l zetec using standard clutch &
flywheel some are saying lucas part LRS543 and others lucas part LRS707. can anyone confirm which it is? cheers jamie
http://www.jamstigeravon.blogspot.com
|
|
|
|
|
coozer
|
| posted on 24/6/08 at 03:07 PM |
|
|
when you say standard clutch do you mean 2.0L or 1.8? MHO is you need the 1.8 flywheel for the clutch to fit and work in the type 9 bellhousing.
Sierra 1.8 CVH or DOHC starter works with the 1.8 zetec flywheel.
1972 V8 Jago
1980 Z750
|
|
|
jamrogers
|
| posted on 24/6/08 at 03:18 PM |
|
|
hi cooser, i've already fitted the engine and box to the car with the 2l flywheel and clutch and clutch works ok, so i'm not sure if that
is correct, all i need is a starter
[Edited on 24/6/08 by jamrogers]
build diary http://jamstigeravon.blogspot.com/
YouTube
https://youtu.be/JwwwilUd5Zo
|
|
|
austin man
|
| posted on 24/6/08 at 08:28 PM |
|
|
Have fitted both 2litre and 1.8 litre zetecs both used the Sierra 1.8 CVH / DOHC starter motors no problem.
You do need to modify the sump if you have not already done so. It needs a section cutting out to allow the starter to fit
|
|
|
jamrogers
|
| posted on 25/6/08 at 09:43 AM |
|
|
Hi austin man, do u know whichclutch release bearing u used?
build diary http://jamstigeravon.blogspot.com/
YouTube
https://youtu.be/JwwwilUd5Zo
|
|
|
Rudy
|
| posted on 25/6/08 at 03:33 PM |
|
|
About release bearing :
http://www.locostbuilders.co.uk/viewthread.php?tid=89074
In my type9 / 1.8 zetec I used sierra starter motor . A couriosity: my starter motor is on the right and in Uk starter motor is on the left.
Sorry about my English
|
|
|
.jpg)
