Dusty
|
posted on 13/8/08 at 08:09 PM |
|
|
ARP Zetec rod bolts
Sods law. Rebuilding my silvertop zetec and just about to fit the ARP rod bolts and I've mislaid the instros. Anyone know what torque they
should be. I'm not using the stretch measurement.
|
|
|
viatron
|
posted on 13/8/08 at 08:21 PM |
|
|
from memory (but check!) with arp lube, tighten to 36 ft/lbs then slacken, repeat a total of 3 times
[Edited on 13-8-2008 by viatron]
|
|
viatron
|
posted on 13/8/08 at 08:26 PM |
|
|
http://www.locostbuilders.co.uk/viewthread.php?tid=29257
|
|
Dusty
|
posted on 13/8/08 at 08:38 PM |
|
|
I'm confused. Silvertop and blacktop use different bolts. Silvertop are M8 I think and blacktop are M9. The ones I have are just under 8mm
measured on the crests of the thread so presumably M8
|
|
Dusty
|
posted on 13/8/08 at 09:49 PM |
|
|
Thanks.
Now tightened to 26 with ARP lube three times. Doesn't seem much for 7000+ revs!
[Edited on 14/8/08 by Dusty]
|
|