metalisic or bonded bushes what ever you call them, two bits of tube with rubber in between!

Anyone got a good supplier for 10mm internal, 22mm outside dia?

RS do them its going to cost £47 for 12 is that good?
The outer is only 20mm long and I would have preferred some a little longer but haven't managed to find another supplier.

[Edited on 26/1/09 by a4gom]

Try RS. You can get them in a variety of sizes. We bought some, though only ended up using one. They seem to be much stiffer than car type versions which is good.

Infact, there you go:

bushes


Ignore my post!! Jumped the gun and failed to read the RS bit. Seems you've found them already
[Edited on 26/1/09 by andylancaster3000]

[Edited on 26/1/09 by andylancaster3000]

loads on ebay.




They are what "the book" used for the wishbone bushes.

they are 22mm outer 36mm long and the center hole is 3/8 but not a big job to take them out to 10mm.

Any fotor factor can supplky matalastic bushes; much cheaper than Ebay.

Any motor factor can supply metalastic bushes; much cheaper than Ebay.